For Sale: Drinks Chiller Gambrel - Fallow/Roe/Muntjac/Wild Boar/Reds/Sika Versions also the New Lazy 7 ready for shipping.

[Tim.243]

The Drinks Chiller Gambrel solves the problem of larger deer hanging in converted fridges and drinks chillers.

Using your existing rail the carcass is hung from the aitch bone gaining much needed room in the bottom of your fridge or drinks chiller for a drip tray minimizing mess and allowing good airflow. (Height gained underneath for Fallow is around 10-16 inches)

Note: Changes to post I will be sending your hangers via Tracked 48

With your inquiry please include RAIL size (diameter)

Material is 304 grade Stainless Steel.

Reds Stags/Hinds, Sika Stags, Fallow Bucks.
8mm SS
£45.00 + p&p
£5.99 Royal mail F Class Signed for

Fallow Prickets /Does / Sika Hinds
8mm SS
£45.00 + p&p £5.55 Royal mail F Class Signed for

Roe/CWD/Muntjac.
8mm SS (side note) rail size is important for small deer
£40.00 + p&p £5.99 Royal mail F Class Signed for

POA for winch lifting points/other mods.

PM for details.
Tim

“Having had recently spoken to Tim about his Deer hangers, I ordered and received 5 of the heavy duty Red Deer versions, I hope to fill them in the not too distant future.”
Lee
(Norfolk Deer Search)

I saw the advert in the sale section. Seen it a few times and toyed with the idea of having one but managed without, until I got a fat doe the other weekend which I could barely fit in the fridge. I nearly lost a finger to one of the S hooks too. Decision made there and then to get one!

Steve29

Tim kindly adapted his cleverly designed ‘drinks chiller gambrel’ by welding a stainless ring on top so I can use my electric winch set-up. I’ve always struggled with larger fallow bucks in my chiller but this is a quick and simple way to gain some extra height and not have half the deer lying squashed on the chiller floor. Item arrived the day after ordering. Well made, and will get plenty of use. Highly recommended.

Woodsy (SD)

Tim sent me a prototype of the gambrel. I found it really solves the problem of storing a longish carcass in a relatively short drinks chiller, keeping the neck out of the blood and dirty water.
It’s a well used technique to hang a side of beef by the aitch bone. Tim’s gambrel achieves this in a whole deer carcass, supporting the carcass through the anal canal. It is an excellent idea to hang a carcass this way if the chiller bar height is an issue.
Larry ( South of the M4 )






Large hanging plate in 8mm

 

[South of the M4]

Tim sent me a prototype of the gambrel. I found it really solves the problem of storing a longish carcass in a relatively short drinks chiller, keeping the neck out of the blood and dirty water.
It’s a well used technique to hang a side of beef by the aitch bone. Tim’s gambrel achieves this in a whole deer carcass, supporting the carcass through the anal canal. It is an excellent idea to hang a carcass this way if the chiller bar height is an issue.

 

[Norfolk Deer Search]

At bloody last!

A yearling lowland hind in the larder!

 

[Tim.243]

40kg Fallow Buck hanging just fine.

 

[wytonpjs]

Some pictures of my first fallow of the season hanging in the chiller with the old rail arrangement (hence request to Tim to modify a pair of extra ones) and then the revised hanging arrangements ready for the next ones Redesigned shorter hangers en-route from that nice man Tim

 

[Tim.243]

Red Hind modified hanger..just a polish and post. @Antonyweeks
@Norfolk Deer Search

 

[Antonyweeks]

Quick thanks to @Tim.243 for the hook. Worked a treat on a 57kg red hind I took earlier in the week. Makes such a big difference to the space in the chiller. Keep up the good work! The 2nd hook is superb for the hoist.

 

[Tim.243]

@GIMLET61
On the bench Mark.
Can you pm me you full address so they can go after this Easter break
Tim

 

[pbear94]

works spot on.

 

[Tim.243]

@Andrewslater
The numbers are the neck is 14" off the floor and 60" to the top of the rump with the rail 67"
74kg
Giving you a ton of room

 

[Tim.243]

A good example of height difference to show a big deer off the floor in a Coke Chiller. A Sika hanging from it's hocks.

 

[Tim.243]

@bonaparte
The pair you ordered for Fallow ready for posting

Tim.243

 

[4616Oxon]

Good stuff put up a picture please. How did you approach the lift as I winch the big stuff but put a hand in the cavity and a lower bear hug with the knees with the lighter ones.

Tim

It wasn’t a huge beast about 36kg 2 fallow does behind on normal
Hangers

 

[Tim.243]

Cranked shaft mod to give clearance on my chiller lifting frame, std left middle/right Red/Fallow.
Lower small hook and cranked shaft keeps fingers safe.

 

[Tim.243]

Don't think you can't get a big deer in a small unit because they are too long.
121kg on the hanger.

 

[Tim.243]

Alice on her own personal hanger...loads of room..

 

[Tim.243]

@Oh6
@Raynard



Ready for posting, payment PM inbound.

Tim

 

[Tim.243]

Norfolk Red on the hanger.

 

[Tim.243]

A nice message from a new stalker who brought a hanger last week.
Matt, good luck with your stalking.
Tim.243

 

[Tim.243]

April 1st Fallow in the chiller shot by a very happy lass...