NON pard adaptor and inserts HELP

[Thoburns]

Little while ago I spotted a thread with a non pard adaptors and inserts for the 007 that didn't require insulation tape etc. And the member really rated them. They were just a few ££. Can't find the thread, anyone seen it?

 

[mr baddoo]

Ebay, type in "pard adapter rings)

 

[Brittany boy]

Think it was a member with a 3D printer was making them I’ll try find it

 

[Brittany boy]

Post in thread 'New pard 007 gen 2 SP LRF bayonet fitting Hawke scopes'

Sep 5, 2024

Guys

Got the new gen 2 007 gen 2 SP LRF
Got the Hawke low mag scopes x 4 on rifles which previously all worked and fitted on the vantage scopes the side winder is a recent acquisition
3 x vantage all fit with slight variable tolerances
1 x side winder - bayonet fitting is too small and won’t slide on at all ???

Anyone had this problem or do pard make a slightly larger bayonet

Cheers

Phil

If you get suck Phil, Richard at Ashford Gun Room will make one with the 3D printer, he made me one for a Ward 800L.

Ade

• Tugmanade

• 

 

[mr baddoo]

Yip, it's ashford gun room that i got mine from on ebay

 

[Greenmist]

Might have been me, got them from aliexpress and an adapter, very happy with them

Post in thread 'Pard NV700 adapter aliexpress'

Apr 6, 2025

This is the small lever in the tightened position, turn forward and the adapter can be removed

The small holes on the side are where the weaver rail attaches, I removed it as I prefer to have lights mounted on the top

• Greenmist

• 

 

[Ratsbadboy]

Little while ago I spotted a thread with a non pard adaptors and inserts for the 007 that didn't require insulation tape etc. And the member really rated them. They were just a few ££. Can't find the thread, anyone seen it?

Just for the record, the Pard adaptors don't need insulating tape - in fact I surprises Pard even supplied the stuff with the 007 units initially (I think they now supply a set of plastic shims with the later 007's). I use strips of plastic cut either from milk/other containers or, if various thicknesses are required, buy some sheets of various thickness Plasticard (google it) and cut that to the required size.