The above is suitable for use with the Pard 007A & S or Sytong HT66 add on night vision scopes (others available on request).
This acts as the interfacing ring from the Add on Night Vision sight to your scope. Removing the requirement for using the roll of tape supplied with the sights to increase the outer diameter of your scope to ensure a snug fit.
These are 3D Printed parts from PLA+ a robust filament.
Please note:
You will need to measure:
1. Your main adapters internal diameter that comes with your night vision. These can come in 42/45 & 48mm measurements. The most common is 45mm.
2. Your scopes outer diameter at the objective lens (I.e where you would look through)
From there you can determine the size required.
Available sizes are :
To suit 45mm main adapter:
1. 39mm Scope O/D
2. 40mm Scope O/D
3. 41mm Scope O/D
To suit 48mm main adapter:
1. 39mm Scope O/D
2. 40mm Scope O/D
3. 41mm Scope O/D
4. 42mm Scope O/D
5. 43mm Scope O/D
6. 44mm Scope O/D
Installation:
When installing these adapter rings please ensure on the main adapter that the Allen bolts are fully undone, slide in the adapter ring(ensuring cutout matches the same position as the main adapter), place on scope , tighten the Allen bolts down accordingly.
Be careful not to overtighten.
Please message me after placing the order requesting what size you require .
Can produce custom sizes on request and for different manufacturers items.
£10 posted
This acts as the interfacing ring from the Add on Night Vision sight to your scope. Removing the requirement for using the roll of tape supplied with the sights to increase the outer diameter of your scope to ensure a snug fit.
These are 3D Printed parts from PLA+ a robust filament.
Please note:
You will need to measure:
1. Your main adapters internal diameter that comes with your night vision. These can come in 42/45 & 48mm measurements. The most common is 45mm.
2. Your scopes outer diameter at the objective lens (I.e where you would look through)
From there you can determine the size required.
Available sizes are :
To suit 45mm main adapter:
1. 39mm Scope O/D
2. 40mm Scope O/D
3. 41mm Scope O/D
To suit 48mm main adapter:
1. 39mm Scope O/D
2. 40mm Scope O/D
3. 41mm Scope O/D
4. 42mm Scope O/D
5. 43mm Scope O/D
6. 44mm Scope O/D
Installation:
When installing these adapter rings please ensure on the main adapter that the Allen bolts are fully undone, slide in the adapter ring(ensuring cutout matches the same position as the main adapter), place on scope , tighten the Allen bolts down accordingly.
Be careful not to overtighten.
Please message me after placing the order requesting what size you require .
Can produce custom sizes on request and for different manufacturers items.
£10 posted
