Sold: Pig saddle

[DavyG]

One (pretty sure unused) Pig saddle clamp from Shadow Tech. £80 posted (Uk)

 

[Deerkeeper2]

Does this fit directly onto a camera type tripod plate?

 

[Eric the Red]

The two holes in the bottom of this should be the two standard camera ones -1/4x20 and 3/8v16, so yes all things being equal.
For the record, it's a Pig Saddle, not a Hog Saddle, the latter being bigger and made of aluminium (and a lot more expensive)

 

[Pard 007]

Fantastic bit of kit think I got mine from Scott country few years back sure it was well over £100 so this is a bargain

 

[Deerkeeper2]

The two holes in the bottom of this should be the two standard camera ones -1/4x20 and 3/8v16, so yes all things being equal.
For the record, it's a Pig Saddle, not a Hog Saddle, the latter being bigger and made of aluminium (and a lot more expensive)

Thanks, in the meantime I did a bit of research and I think you’re correct, it looks like the Pig version not the Hog.

 

[DavyG]

Thanks, in the meantime I did a bit of research and I think you’re correct, it looks like the Pig version not the Hog.

You are correct. It was on a Rekon tripod. Not my intention to be “misleading”, but it had “Hog saddle” moulded into the rubber pads. The “Pig” saddle is £145 from Scott country. I’ll change the ad title.
Regards,
DG

 

[wisp]

Hi. If it’s the one that fits on the rekon fibre tripod can I have it please

 

[DavyG]

Hi. If it’s the one that fits on the rekon fibre tripod can I have it please

That’s what it came off…
Send me a PM and we can exchange details.
Regards,
DG