Portable reloading press ideas for Forster coax

[sauer]

Well as I sit cosy in front of the log burner …. Minis whatever degrees ootside & I should be getting on with reloading but the shack also in minis figures
Soooo
Ideas for a portable solution / frame or something idea wise to have my Forster coax press easy portable do I can quickly set up in dining room and do the business in the warm ?
And drilling thru wife’s oak dining table NOT an option !

Cheers
Paul

 

[Jelen]

Black n Decker workmate?

 

[Bavarianbrit]

I have a box frame made up with 18mm multiplex ply. I did have this Lyman press on it when photo taken then I fitted a Rockchucker to it for 2 years and now last week a Prazipress 120mm, it is 3x G clamped to the 2 inch block top that I had screwed to an old sewing machine cast iron frame. A very solid and cheap setup for onto a dining table?

 

[Boomerang]

Ultramount - Inline Fabrication

I use one of these in my shed to lift the Co-ax higher so it is easier to see and operate. I use 2 C-clamps to hold it in place - with appropriate protection for your dining table could be a solution. I think 1967spud is a UK stockist or at least was...or check the dealer page on their website

 

[Selous]

Just bolt the press to a section of worktop making sure the bottom surface has no protrusions to scratch the dining table and put a weight on the worktop when in use. I use it as my permanent setup with a Co-ax and it works well