Primos Trigger Stick gen 3 - legs dropping inconsistently

[tonyshooter]

My Primos Trigger Stick ( Gen 3 ) has started to develop a lazy leg and occasionally 2 lazy legs.

The seem to drop ( sometimes not at all ) at different rates.

I have given them a good clean.

Please can anyone offer advice on how to effect a lasting repair

 

[Fair Hill]

My Primos Trigger Stick ( Gen 3 ) has started to develop a lazy leg and occasionally 2 lazy legs.

The seem to drop ( sometimes not at all ) at different rates.

I have given them a good clean.

Please can anyone offer advice on how to effect a lasting repair

Plenty stuff on YouTube on how to fix them.

 

[tonyshooter]

Thanks, I have looked and I am still struggling to find the correct video on YouTube

 

[Sierra]

You will need to strip the legs down to give them a good dig out. Had this with mine. Build up of crud in the roller locking ends has seized it up.

Try this link.

 

[Blench99]

Theres definitely a video on youtube, legs need stripped down and rollers cleaned

 

[morrisman]

I pulled the plastic caps off and cleaned the crap inside and then fixed them back with normal evostick. Works now.

 

[morrisman]

By the way, be careful of the little c clips, they're a bugger to get back.

 

[Pete1774]

I pulled the plastic caps off and cleaned the crap inside and then fixed them back with normal evostick. Works now.

I did the same and also works fine now.