Quick detach rings for thermal scope

[Clive Ward]

What would people recommend for QD mounts to allow switching a thermal between rifles?

Thanks!

If you want to switch 'between rifles' then you need the Innomount ZERO. This has built in torque limiters in the thumb levers so will adapt to different rail dimensions and be 100% repeatable.

Alternatively any decent(ish) scope mounts and a torque driver.

The standard 'push button' Innomount is for using the scope on ONE rifle.

Best results are achieved if you mount and fully torque 10 times before zeroing to bed the mounts.


Cheers





Clive

 

[Mungo]

If you want to switch 'between rifles' then you need the Innomount ZERO. This has built in torque limiters in the thumb levers so will adapt to different rail dimensions and be 100% repeatable.

Alternatively any decent(ish) scope mounts and a torque driver.

The standard 'push button' Innomount is for using the scope on ONE rifle.

Best results are achieved if you mount and fully torque 10 times before zeroing to bed the mounts.


Cheers





Clive

Very useful. Thank you

 

[Long drag]

Something to watch out for, when putting on the mount Innomount ect, push the mount forward
when sitting between the slots of the Pickatnny rail before locking, makes a world of difference.

 

[Mungo]

Something to watch out for, when putting on the mount Innomount ect, push the mount forward
when sitting between the slots of the Pickatnny rail before locking, makes a world of difference.

Yes, that’s standard for all cross slot mounts.