QuickLOAD request please.

bryn

Well-Known Member
Could some oblige and run the following through their quick load please.

Rifle
Sako S90 .243
1:8 twist
20” barrel length.

Bullet
Barnes 62g varmint grenade
BC G1 .199
Length .978”
Sectional density 0.150

Case (Norma)
Trim 2.035”
COL 2.645


Powder
Viht N140

Many thanks in anticipation.
Bryn
 
Could some oblige and run the following through their quick load please.

Rifle
Sako S90 .243
1:8 twist
20” barrel length.

Bullet
Barnes 62g varmint grenade
BC G1 .199
Length .978”
Sectional density 0.150

Case (Norma)
Trim 2.035”
COL 2.645


Powder
Viht N140

Many thanks in anticipation.
Bryn
TBF i haven't used quickload and quick target for many years now . These things are still best done on the range with your individual rifle , a start load , at the best Barnes should have start and stop loads for a few similar bullets online (as a start load it doesn't need to be the exact bullet " near enough is fine" as its just a start point . Really you cannot build a load from what the PC thinks . This is true of all data compiled by computers.
A chronograph , your materials , rifle and a good rest and a 12 o'clock of 6 o'clock light wind .
IF YOU ARE BRAND NEW TO RELOADING get help from an experienced person near to you.
I have personally not done well with the varmint grenade in a few different calibres but you might have better luck . Put your location up its good to have experienced hands when first starting loading
 
Bryn, you got many sound advices from the colleagues. This dirty foreigner ran Quickload for you, with the following data:

BRYN DATA

Powder Viht N140

Sako S90
Cal. .243 Win
Bullet: Barnes 62 grs. Rifle Grenade

QUICKLOAD RESULTS
Max. pressure 60,191 psi (CIP? Or SAAMI?)
Case capacity 54 grs H2O (please check with your cases)




Vihtavuori N140​
Max. Chamber Pressure​
MV​
[grs]​
[psi]​
[fps]​
43.68​
60,183​
3404​
43.5​
59,410​
3392​
43.0​
57,312​
3356​
42.5​
55,287​
3321​
42.0​
53,331​
3285​

Take these data with looong pliers!
 
Back
Top