I am reluctantly offering my Sako 75 that has been re-barrelled in 6mm Creedmoor with a 1:8 twist for sale. The barrel, reciever and moderator are in green cerakote while the bolt and trigger guard are in hunter orange. I also have 198 pieces of Lapua 6mm CM brass (small primer) that I will include - 100 are once fired, 60 are twice fired and 38 are loaded. I also have 20 Hornady (large primer) cases that I will include in the sale. The Hornady Precision Hunter were bought as a "control" round for reference when developing my own load.
The rifle was purchased in the summer of 2025 as a .243 Winchester in very good order. I had a local gunsmith re-finish the stock to clean it up and make it look like new while Barton Gunworks fitted it with a HS Precision sporter barrel cut to 22 inches. The rifle is fitted with a Barton Gunworks 0 MOA picattiny rail although I also have Sako bases and 30mm rings that can be fitted if preferred. I'm not sure what height the rings are, but I have fitted a HikMicro Stellar 3 SQ50 without trouble.
The rifle is deadly accurate with Sako Blade (80 grain) and VV N540 going at 3281 fps.
Looking for £1750 ono.
The rifle was purchased in the summer of 2025 as a .243 Winchester in very good order. I had a local gunsmith re-finish the stock to clean it up and make it look like new while Barton Gunworks fitted it with a HS Precision sporter barrel cut to 22 inches. The rifle is fitted with a Barton Gunworks 0 MOA picattiny rail although I also have Sako bases and 30mm rings that can be fitted if preferred. I'm not sure what height the rings are, but I have fitted a HikMicro Stellar 3 SQ50 without trouble.
The rifle is deadly accurate with Sako Blade (80 grain) and VV N540 going at 3281 fps.
Looking for £1750 ono.
