Wanted: Schultz & Larsen Legacy 1" scope Mounts

[Cogswell & Harrison]

I'm in need of at least one and possibly two pairs of the above please, must be for the Legacy which has the reduced diameter cross bolt due to the micro action of this particular model.

I forgot to mention, low version also please.

Thank You.

 

[Cottis]

I think they all fit across the board don't they? I have a Legacy and a Classic and have moved scopes back and forth between the two without issue. One set is 34mm and the other 30mm, so deffo didn't get them mixed up from memory.

If you needed/wanted a genuine Legacy Pic rail in order to use low generic pic mounts, I have one spare somewhere that i don't use anymore. Would probably end up much cheaper than the genuine S&L rings which are good but pretty expensive.

 

[Cogswell & Harrison]

I think they all fit across the board don't they? I have a Legacy and a Classic and have moved scopes back and forth between the two without issue. One set is 34mm and the other 30mm, so deffo didn't get them mixed up from memory.

If you needed/wanted a genuine Legacy Pic rail in order to use low generic pic mounts, I have one spare somewhere that i don't use anymore. Would probably end up much cheaper than the genuine S&L rings which are good but pretty expensive.

Thanks for this information. I didn't know that the mounts were identical, I was certain that the cross bolt has its shank diameter machined slightly slimmer to clear the top of the action but assumed that the mounts themselves were correspondingly made smaller too.

I'll hang on in for the mounts but thank you for your offer of the pic rail.

 

[HonestJohn]

I’ve been after some low SL 30mm’s rings for a while. Seems very much like people who buy them, use them and keep them.

I’ve only been left the option of buying new, which is really expensive