For sale is my personal rifle, built to the highest possible standards
20” Phoeniix Barrels cut rifle barrel, R1 Varmint profile, 1:8” twist chambered .243 win and screwcut M18x1mm, shot less than 100 rounds
McMillan A3 edge tech carbon stock complete with low and medium Kydex cheek pieces. CNC inlet for Tier 1 DBM by Mckillop engineering. DBM and 1 AICS Mag included. Picatinny rail for bipod and 3 QD swivel mounts.
Blueprinted Action (action threads, lug abutments, action face, bolt lugs, bolt face trued) and new extractor fitted, no wear to secondary cams and an extremely close bolt/raceway fil. Recoil Lug was surface ground parallel. Headspaced to minimum tolerances fully bedded, not just skim bedded.
Jewel Trigger
Tier one 0moa rail
Fully Cerakoated “Multicam” Green
Shoots 87vmax and 70 gn Ballistic tip into the same hole, and will undoubtedly work very well with monolithic copper projectiles. Will stabilise any bullets up to 110gn.
With all the components and labour and coating, even at s/h component prices , to build this now would cost around £2500-£3000 – for sale as an absolute gift at £1350.
20” Phoeniix Barrels cut rifle barrel, R1 Varmint profile, 1:8” twist chambered .243 win and screwcut M18x1mm, shot less than 100 rounds
McMillan A3 edge tech carbon stock complete with low and medium Kydex cheek pieces. CNC inlet for Tier 1 DBM by Mckillop engineering. DBM and 1 AICS Mag included. Picatinny rail for bipod and 3 QD swivel mounts.
Blueprinted Action (action threads, lug abutments, action face, bolt lugs, bolt face trued) and new extractor fitted, no wear to secondary cams and an extremely close bolt/raceway fil. Recoil Lug was surface ground parallel. Headspaced to minimum tolerances fully bedded, not just skim bedded.
Jewel Trigger
Tier one 0moa rail
Fully Cerakoated “Multicam” Green
Shoots 87vmax and 70 gn Ballistic tip into the same hole, and will undoubtedly work very well with monolithic copper projectiles. Will stabilise any bullets up to 110gn.
With all the components and labour and coating, even at s/h component prices , to build this now would cost around £2500-£3000 – for sale as an absolute gift at £1350.
Attachments
Last edited:
