Sold: Semi Custom Tikka T3X in 6.5PRC in PSE EVO stock.

SJC

Well-Known Member
As titled, im looking to sell my Tikka T3X in 6.5PRC, in PSE EVO stock, MDT Mid Bottom Metal and Mag (a true medium action so cycles very well), Barreled by Neil McKillop with a Bartlins (Tikka Varmint profile) barrel at 22", two stage tikka trigger with the bolt release so you can open it on safe, sterk bolt handle etc.

It shoots very well with YewTree's, and hornady ELD M's , ive not tried anything else in it.

Selling only as im having a sort out as well as looking at full custom.

Photos to follow.

Looking for £2150.00 or near offer.
 
Last edited:
I can personally vouch for this rifle. I used this rifle for the first time to grass my 1st wild Red stag. It shoots very well with very manageable recoil.
 
I have 1 very similar.
Just for clarity for you're add
Is the barrel a Tikka barrel or a barrel that has been profiled to a Tikka varmint profile?
I suspect the later 👍PXL_20260206_121712775.webp
 
Valid point ColinBR, the barrel is a bartlin and was in the purchased in the correct profile, no reprofiling required.
 
Valid point ColinBR, the barrel is a bartlin and was in the purchased in the correct profile, no reprofiling required.
I was the same with mine. Though mine is a Phoenix (Sassen) barrel. It was ordered as is
 
  • Like
Reactions: SJC
Good luck with your sale - shouldn’t be around long looking like that and the provenance of who built it 👌
 
  • Like
Reactions: SJC
For those that have asked regards group size please see above.

There is a chance I pulled the 3rd, so it might shoot even better
 
Last edited:
Hi Mungo,

The mags are still avaible from MDT. I have a 10 round brought from rifle mags and it is far to tall, and the 5 round in the picture from MDT themselves.

The bottom metal is no longer being made. There was one on here, im struggling to find it now, and i beleive rifle mags have one left, or had one left.

Hope that helps.
 
Price has been lowered a little more.

Would consider selling the barreled action separately but the barreled action would need to go first before I sell the stock.

Many thanks
 
Colin, I hope you are ok? I would be interested in the stock, mag and bottom metal. Please let me know if you sell the action. Best of luck with the sale.
 
Hey Peakey,

Not sure who Colin is i am afraid, but i well thank you for asking. I hope the same can be said for yourself.

There's a little bit of cue forming for the stock, but ill keep you in mind.

Thank you
 
Back
Top