Stream Vision Ballistics - Pulsar Models

[Blackwood Outdoors]

Ian.
Any chance you can get pulsar to give us an option on the holdover mark ie a - instead of the x and make it thin like on the Pard DS35 please ?

I think they will do this on the next releases for sure... They have invested a lot of time and effort into this, so I'm sure it will be perfected as we go along..

 

[Snoopy]

Hi ive been using the balistic reticle for 2 weeks now but now when I range find up hill it gives me a stupid poa
Ie using a 22lr at 100yds uphill at 11 degrees its giving me a poa 4 moa dots above my cross hair.
Do you know of anyone else thats had the same issue
Cheers

 

[mealiejimmy]

When you aim uphill (or downhill) you need to aim low because the effect of gravity is reduced, so the bullet drop is less
Putting the poa above the reticle is the ballistic calculator telling you to aim low.
Maybe the ballistic calculator understands ballistics better than you

Cheers

Bruce

 

[Snoopy]

When you aim uphill (or downhill) you need to aim low because the effect of gravity is reduced, so the bullet drop is less
Putting the poa above the reticle is the ballistic calculator telling you to aim low.
Maybe the ballistic calculator understands ballistics better than you

Cheers

Bruce

Yes i understand balistics but when you shoot its always well below the target
When you crunch the numbers on a different balistic calculator its always below the centre of the cross hair and when using the holdover it recommends its correct when firing at the target.

 

[BLUEROLL]

Hi ive been using the balistic reticle for 2 weeks now but now when I range find up hill it gives me a stupid poa
Ie using a 22lr at 100yds uphill at 11 degrees its giving me a poa 4 moa dots above my cross hair.
Do you know of anyone else thats had the same issue
Cheers

Yes there has been an issue but the new firmware released last week (

Thermion 2 LRF XP50 Pro

3.1.001

24.05.2023

) has sorted it on mine.

 

[BLUEROLL]

Yes there has been an issue but the new firmware released last week (

Thermion 2 LRF XP50 Pro

3.1.001

24.05.2023

) has sorted it on mine.

The issue only manifested itself when the incline was above 2 degrees.

 

[Snoopy]

Yes there has been an issue but the new firmware released last week (

Thermion 2 LRF XP50 Pro

3.1.001

24.05.2023

) has sorted it on mine.

Cheers ill have a look

 

[Sakoodin1]

Any ideas of anyone why my ballistic app isn’t working now on my xg50?? It did no problem but now it’s shooting 10” low at 400 yards and no matter what numbers I try to fudge to change poi it still shoots low? I’ve ended up turning off the ballistic app and using hold over to hit the target. Pulsar does my t**s in there’s always an issue somewhere with there kit. For the money you pay I expect better. Pulled the trusty old .270 out and the ds on top and drilled the plate at 500 first shot that’s what I’m after with the pulsar