Sold: Tikka t3x wideland veil rifle-stock

Cypher270

Well-Known Member
Upgrading my stock and wanting to part with this. The floor plate can be included for an extra £20

I've only had this a year or so and been out with a handful of times.

Looking for £75 for the stock. The stock has an additional modification, an aluminium block at the fore-end, this has allowed for a opposite bolt side QD flushcup for better carrying with a bipod attached. 1000020383.jpg
I've been told by the gunsmith that because of the block you could add a piccitiny rail readily if you so wish.

Based in the Cairngorms/ happy to travel for those interested around the area.
 

Attachments

  • 1000020385.webp
    1000020385.webp
    96.5 KB · Views: 137
  • 1000020389.webp
    1000020389.webp
    127 KB · Views: 123
  • 1000020387.webp
    1000020387.webp
    213.8 KB · Views: 136
Not at all, sits low. It doesn't affect accuracy. I was getting a 0.5MOA at 100m with this stock.

Worth mentioning I have the standard LITE barrel rather than a Super varmint so that may vary.
 
No worries thanks for that
It was the little mark on the block that made me curious.

Did you use it with a magazine at all ?
 
All the same for factory stock
Yes, discovered that when I did some more digging, thanks. I have a T3X Wideland Veil in .308 which now resides in a MDT HNT-26 Short Action stock :rolleyes: Whilst the Tikka stocks appear to be agnostic, all of the aftermarket stocks specify SA or LA 🤷‍♂️ I was potentially interested until I discovered my .308 stock will fit a .270 LA T3X I'm just about to pick up.
 
Back
Top