7.5x55swiss GP11

[ging125]

I have 20 brass cases in total! [emoji30]

 

[ging125]

When I get these factory PPU bought and shot I can pass some on if you need?

 

[kennyc]

PRVI PARTIZAN 7.5X55 SWISS FMJ 174GN (20) - Leamon Sporting Supplies

PPU Prvi Partizan Brass (List 1) | 1967spud Reloading Supplies Ltd

ITL Shooting Suppliers - for all your shooting needs - Ammunition

Shooting Supplies Categories (out of stock at present but have a message me option)

 

[Jules2650]

When I get these factory PPU bought and shot I can pass some on if you need?

Thanks for the kind offer, but you keep it mate it you need it too

 

[Jules2650]

PRVI PARTIZAN 7.5X55 SWISS FMJ 174GN (20) - Leamon Sporting Supplies

PPU Prvi Partizan Brass (List 1) | 1967spud Reloading Supplies Ltd

ITL Shooting Suppliers - for all your shooting needs - Ammunition

Shooting Supplies Categories (out of stock at present but have a message me option)

I got my GP11 from ITL, just too far for me to go.

Spud had no brass when i emailed last

 

[kennyc]

I got my GP11 from ITL, just too far for me to go.

Spud had no brass when i emailed last

strewth! need to keep my eyes on mine if its that hard to come by now! I bought my last PPU from the NRA office at Bisley but that was a couple of years ago, the brass lasts so well.

 

[doonered]

Hi. I can also reccomend the ppu 74gn bullet. I've been using it with vit n140 and it shoots very well. Also I've now loaded appx 500 with the lee dies with no problems. As to seating depth I copied an idea from YouTube and used an unprimed cartridge with a split cut in the top just deep enough to hold a bullet. Chamber this gently and then remove and measure for depth to lands.
For the last few months Ive been shooting cast lead bullets with a light load of unique. At 100yards these are excellent. And very cheap.

 

[ging125]

Which cast heads have you been using or what mould?

 

[dodgyrog]

Beware - different models of the Swiss rifles require different mould designs

 

[ging125]

Beware - different models of the Swiss rifles require different mould designs

I have a K31, where would I find the mould info?
Cheers

 

[doonered]

I'm using a lee c312-155-2r mold. Half and half lead and linotype gives a bullet weighing 153gn. I slugged the bore and found it to be exactly .308. So I use a lee lube and size kit to bring the bullet down to .309. I use a gas check and l both liquid alox and wax lube the bullets. I am a novice caster but the seem to shoot really well. I got my info from the usual suspects, you tube and internet. Best source of info I found was the Lyman cast bullet handbook.

 

[phaedra]

Try going on the NOE website - 308 moulds - K31 by name - link below
311-180-RF 2 cavity GC (K-31), NOE Bullet Moulds
I have the 5 cavity mould which casts very nicely

(dodgyrog on Phaedra's computer)

 

[ging125]

Try going on the NOE website - 308 moulds - K31 by name - link below
311-180-RF 2 cavity GC (K-31), NOE Bullet Moulds
I have the 5 cavity mould which casts very nicely

(dodgyrog on Phaedra's computer)

Brilliant thanks!

 

[shooternz]

I can recommend the NOE moulds excellent bits of kit have several of them not the K31 though, I have a Lyman 311332 mould that I shoot in my K31 NOE make a copy of it as well

 

[kennyc]

I'm enjoying this thread keep the info coming

 

[Laurie]

Chris (ging125) - am trying to send you a PM, but your in-box is full.

 

[ging125]

Chris (ging125) - am trying to send you a PM, but your in-box is full.

Empty inbox now Laurie...
C

 

[ging125]

I can recommend the NOE moulds excellent bits of kit have several of them not the K31 though, I have a Lyman 311332 mould that I shoot in my K31 NOE make a copy of it as well

Have you bought of the website or is their a UK sure you got them from?
Cheers
C