Sorry, these are not MAX
They are like any paper based load data THEORETICAL
it still requires you working up but with the data I have it looks to be a good start
THE BIGGEST SINGLE PIECE OF MISSING DATA IN THIS SCENARIO IS CASE VOLUME
MEASURE YOURS AND APPLY TO THE VALUE IN THE SHOT ABOVE
(BIGGER=LESS PRESSURE
SMALLER=MORE PRESSURE
ALL OTHER ASPECTS REMAINING CONSTANT)
N550 would be my preference
N160 is a little slow to see optimum velocities, especially with 20" to play with
but as with anything if you find an accurate load below expected MV then my persoanl choice is to run slower and accurate over faster and moderately less accurate
deer do not possess chronographs (at least not in Scotland, Richmond Park Reds may do....)
They are like any paper based load data THEORETICAL
it still requires you working up but with the data I have it looks to be a good start
THE BIGGEST SINGLE PIECE OF MISSING DATA IN THIS SCENARIO IS CASE VOLUME
MEASURE YOURS AND APPLY TO THE VALUE IN THE SHOT ABOVE
(BIGGER=LESS PRESSURE
SMALLER=MORE PRESSURE
ALL OTHER ASPECTS REMAINING CONSTANT)
N550 would be my preference
N160 is a little slow to see optimum velocities, especially with 20" to play with
but as with anything if you find an accurate load below expected MV then my persoanl choice is to run slower and accurate over faster and moderately less accurate
deer do not possess chronographs (at least not in Scotland, Richmond Park Reds may do....)
Last edited:
