Light weight moderator

[hawk eye]

Hello

Looking for a slim, lightweight and over barrel moderator a lightweight stalking rifle, does anyone have any suggestions? So many makes and models out there!!

Thanks in advance

 

[pendle]

I have 3 Shultz and Larson micro mods . Slim lightweight but they are end cans.

About £155.00

 

[r judd]

Currently have a RCC hunter. Slim and good noise reduction. 320g if i remember. Also over barrel. Not exspensive

 

[Camdig]

I've got a Titanium Aurora on 243, it slim and light weight but super expensive.
It came with rifle when I bought second hand. Cracking Mod though

 

[gixer1]

Atec H2, lightweight and very good build quality.

 

[slider]

Freyr & Derrick. Not over barrel but very short and as light as you will get.

 

[Utectok]

I’ve had very good experiences with Freyr and Devik ones. Light and great sound moderation lasted over 2500 rounds and counting

 

[Bowland blades]

consider shortening the barrel , the balance is far more important than titanium or steel etc . You can always go to a little faster burning powder and some cartridges are very happy with a much shorter barrel as std think .223 verses say 7mm rem mag .
I took a fair old lop off a 223 rem , my RFD was doubtful but i did it anyhow and same loads there was no difference . Weight saving but most importantly not as tippy at the muzzle

 

[J@son]

Another vote for F&D. Very impressed with mine. It's the smallest model in this range:

ULTIMATE SILENCE 3D | freyr-devik

www.freyr-devik.no

...and it's on my .308 . I would rate it over the much larger, heavier S&L Ultradome mod on my .243.

 

[Tazz]

F&D very light have one on a 300wm very good or Stalon both are slim and over barrel

 

[HonestJohn]

barton gunworks.

 

[spanj]

Hard pressed to beat a dpt

 

[beanieboy]

Second the DPT. Mine is very light, even with an extra stainless baffle.

 

[Miki]

Big fan of DPT here too ...

DPT UK Europe Ltd - Ultralight CentreFire and Rimfire Rifle Supressors

 

[Adyb]

Freyr and devik- i have 2 x fw196 for 30-06 and 7mmRM. I'd call them semi over-barrel. Best compromise for weight, size, effectiveness imo. I'm looking just to take the sting out and not have ringing ears after 1-2 shots - dont like a big mod.
Will upgrade to one of the 3d ultimates sooner or later.

 

[lochty]

Lawrence aurora titanium. But expensive.

 

[rwade545]

Would recommend DPT then anything else , even maybe try a bit of tinfoil, a loo roll painted black or shooting through a pillow and then if your still stuck maybe a Lawrence precision. ( my opinion only)

 

[Staggie.308]

Hello

Looking for a slim, lightweight and over barrel moderator a lightweight stalking rifle, does anyone have any suggestions? So many makes and models out there!!

Thanks in advance

Hardy Gen 6

 

[shoppe]

Lawerence precision. Its pretty light, over barrel. One of the quietest I have ever heard, maybe even the quietest.
Some short moderator's are not very quiet at all.

 

[rwade545]

Moderator failure

Thought I would get your collective thoughts on this. Obviously this is my side of the story but would appreciate your expertise. I already have discussed this with a few gunsmiths and they have given their views. Story- custom 6.5prc, carbon barrel, custom action, PSE stock- no expense...

www.thestalkingdirectory.co.uk

Not a Lawrence precision. Those of you who have one, glad it works. I won’t even put the replacement forced upon me near my rifle.


this is how it shoots with a spare hardy gen4 6.5mm so doubt it is due to poor rifle manufacturing.