LesC
Member
As you all are aware Hodgson Powders are nigh on impossible to get, for longer than I can remember I have been using a Blaser Pro Success, 22" 1:11? Twist 308W Lapua Cases, Load was Nosler 150Gr Ballistic Tip Spitzer (P/N 30150) with H4895, 45.4 Gr, 2.800OAL, MV is in the region of 2860fps and accurate enough for my needs.
Unfortunately Im down to my last few grains of H4895 but do have lots of N140 left over from other loads, Im hoping to make use of the N140 and Im ready to start working through some loads.
Im planning on starting at 42.5gr in 0.2gr increments upto a max of 46.3 was wondering if this is worth trying and if anyone has run this combination of bullet and powder through the QL software?
The Vihtavuori software doesnt list the Ballistic Tip Bullet?
Reloading data tool for rifle, handgun and cowboy action shooting - Vihtavuori
Any advice appreciated, TIA
Les
Unfortunately Im down to my last few grains of H4895 but do have lots of N140 left over from other loads, Im hoping to make use of the N140 and Im ready to start working through some loads.
Im planning on starting at 42.5gr in 0.2gr increments upto a max of 46.3 was wondering if this is worth trying and if anyone has run this combination of bullet and powder through the QL software?
The Vihtavuori software doesnt list the Ballistic Tip Bullet?
Reloading data tool for rifle, handgun and cowboy action shooting - Vihtavuori
Any advice appreciated, TIA
Les