Bino and thermal harness

Scrappy

Member
Hi all, wanting a bino harness that will take my thermal also. Axion lrf. Anyone have one and can recommend one that will fit it nice
 
This is how I've attached my XG35 to the side of my vortex glass pack!.
Good old cable ties and an over heavy carabiner!. I'm going to change out the carabiner as being stainless steel it's a tad hefty for what's needed 🤣.
 

Attachments

  • 17235426534814432997078776476991.webp
    17235426534814432997078776476991.webp
    284.1 KB · Views: 171
Harkila bino harness comes with a pouch either side that fit a pulsar size thermal perfect. Cheap pistol retention lanyard useful as a fail safe!

Good review here:
 

Attachments

  • IMG_7996.webp
    IMG_7996.webp
    37.9 KB · Views: 28
Last edited:
I think a bit of sewing/making might be the answer. Or just make do. I've found it surprisingly difficult finding a binopack I'm happy with.
 
Any of the harnesses with molle straps left and right of the bino pouch will allow you to buy a suitable sized molle pouch from eBay or amazon for your thermal.

Personally I use an emberstock one with Spartan bipod on the right side along with a small knife pouch and a molle pouch from Amazon on the left that fits my Hik condor pretty well

Here is but a few options:-



 
I use an Alaska guide creations “Ravus’ pack with their accessory pouch on the side. Works great for my Hik Lynx but not sure how it’d do for the axion
 
Any of the harnesses with molle straps left and right of the bino pouch will allow you to buy a suitable sized molle pouch from eBay or amazon for your thermal.

Personally I use an emberstock one with Spartan bipod on the right side along with a small knife pouch and a molle pouch from Amazon on the left that fits my Hik condor pretty well

Here is but a few options:-



Hey mate,
Do you have a picture of your setup? Thanks
 
The webbing attachments on Marsupial pouches will take a molle strap perfectly, just choose your molle pouch 👍

Bottom webbing clip shown in picture below. Pouch stays on when you take the harness on/off and can be swapped or removed in a matter of seconds.
 

Attachments

  • Ranger_Green_Back_5000x.webp
    Ranger_Green_Back_5000x.webp
    223.7 KB · Views: 36
Hey mate,
Do you have a picture of your setup? Thanks

I've got a very similar set up using the Eberlestock. Small pouch to one side with a lanyard for my Pulsar, mag pouch on the other side for the Spartan bipod and then a groin/dangler pouch underneath for gralloching bits (knife, gloves, torch, pulley).

All pouches were off AliExpress and a few quid each.
20240227_152424.webp
 
I've got a very similar set up using the Eberlestock. Small pouch to one side with a lanyard for my Pulsar, mag pouch on the other side for the Spartan bipod and then a groin/dangler pouch underneath for gralloching bits (knife, gloves, torch, pulley).

All pouches were off AliExpress and a few quid each.
View attachment 392572
Just found this on the search function.
How is the bottom pouch attached to the Eberlestock? Some of the review mentioned that there is only velcro and no molle on the bottom of the bino compartment?
cheers
 
Just found this on the search function.
How is the bottom pouch attached to the Eberlestock? Some of the review mentioned that there is only velcro and no molle on the bottom of the bino compartment?
cheers
It is a pouch designed for body armour plate carriers and has a double sided velcro tab that fits onto the harness. If you look on the Eberlestock website for the Recon and the accessories they make you'll see their pouch and how it attached. This will make it easier to find a aftermarket pouch with the right dimensions and same velcro attachment.
 
Back
Top