IR torch mount

[VssF]

Hi guys. I'm currently using a Pard ds35 NV scope and an IR torch. I have a picatiny rail on my scope and tge nitemaster clamp on my torch but it doesn't sit still.

How are you attaching yours?

 

[nocturnaldave]

I use the one that came with the wicked light I bought years ago. I find it is stable but has the elevation and windage style knobs to allow you to place the beam where you want it. Haven’t seen anything to make me want to change it yet.

 

[Greenmist]

There was a thread on this a few weeks back, lots of people like the figure 8 clamps and get on fine with them, I like the adjustable ones that you can get from the likes of ant supplies

 

[Pellet Pinger]

Cheap picatinny ring and just spend a bit of time shimming the torch so the beam lines up perfectly and thats it, returns to “zero” and doesn’t move, did my Wraith ESL when i bought it and not touched it since.

 

[Cyres]

Burris Zee signature ring on torch attach to short scope fitted rail. Once tight rock sold. Next best thing is Ludicrous Lumens mounts.
I use both systems.
D

 

[paulst]

I use a cheap figure of 8 clamp. Check which orientation aligns the beam the best, which way up and which way round, then chamfer the top of the clamp so that you can figure out which way to mount it in the dark. Works well for me.

 

[BenBhoy]

nitemaster clamp

I never got on with nightmaster torch mount, found the thread too fine, felt like always one turn from grinding it off. I have same scope as you, I use ludicrous lumens adjustable mount, brilliant item.

NEW FULLY adjustable IR mount 25MM & 30MM lamp bodies. NEW FULLY adjustable IR mount 25MM & 30MM lamp bodies.

 

[Cyres]

This is my Burris set up which I use with a Photon. It's quick detach and I find never needs any adjustment.
D

 

[sikasako]

I prefer the adjustable mounts, such as per the attached picture.

 

[nf-fuse]

I got a cheap adjustable one from ant supplies. Works fine on 223

 

[Cyres]

Originally I used the Ant ones. They are good but heavy. For the money Ludicrous lumens mounts are in a different league.
D

 

[nf-fuse]

This is the one I'm talking about

Rotating Ring IR Torch Quick-Release Mount for Weaver / Picatinny Rail

www.ant-supplies.uk

Not sure if this is the one you mean is heavy.

 

[palo]

I tried most of them. The night master one was the worst.
This one is the best I've used so far .
It only adjusts up and down which is fine if your picatinny mount is level on your scope.