Yeah, Barnes VORTXAre these factory ?
Yeah, Barnes VORTXAre these factory ?
Mine are home loaded, but as above they do come in a factory offeringAre these factory ?
Did you ever run them over a chronoYeah, Barnes VORTX
No never, was just recommending a factory load, as I use ttsx for homeloads in all my calibres .Did you ever run them over a chrono
Sako blades were advertised at 3300No never, was just recommending a factory load, as I use ttsx for homeloads in all my calibres .
The 80 gr I believe is advertised at around 3350fps , but I’ve not checked them
Then chrony these?Sako blades were advertised at 3300
I chronographs them at 2850
I was using these to great effect but now they're like rocking horse s**t .Been advised to go to the next one up which is only a tad more expensive but still having probs getting them here in Sussex /Kent.If anyone knows where I'd be grateful .Federal power shock copper is what I use
Are these homeloads or factory
Same here, I tried Winchester they worked as well, I have since bought Barnes heads to reload as I already reload my 308I was using these to great effect but now they're like rocking horse s**t .Been advised to go to the next one up which is only a tad more expensive but still having probs getting them here in Sussex /Kent.If anyone knows where I'd be grateful .
Sorry for delayed response, 'out of office'. Yes 80gr GMX. Also use 130gr equivalent in 270. Both are more accurate than best factory lead I found for my rifles and never had an issue with them.Is that Hornady GMX ? £50 a box ?
I get 3,330fps using Superformance powder with the 80 grain TTSXMay I ask what powder your using to obtain that 3307 fps average. Thanks
I got similar results with N550 powder.I get 3,330fps using Superformance powder with the 80 grain TTSX
I went to copper nearly two years ago when the game dealer announced it was likely he’d only be accepting non-lead shot carcasses before too long. I tried a few alternatives but my Sako S20 .243 1:10” twist shoots Sako Powerhead Blade II 80gr TTSX super accurately.I currently shoot 100 grn lead through my .243 which is a Tikka T3
Now that the imminent ban is getting closer what do people recommend I switch to ?
Never used copper or know anybody that does so what are your recommendations and cost ?
Also any updates whether or not the .243 will still be banned from using lead as per the initial government response.
I get 3,330fps using Superformance powder with the 80 grain TTSX
48.5 out of a 22" barrelWhat grain are you running to get 3330? I assume somewhere in the middle?
Good to know, I’m running a 22” barrel as well.48.5 out of a 22" barrel