Tikka M595 & T3 bolt knobs

Donkey Basher · Thursday at 6:09 PM

Quick enquiry, think I may know the answer but...

Does anyone know whether a bolt handle from a T3 bolt will fit the bolt of an M595 please? Looking for a quick & simple way to add a larger ball on one of my M595s.

TIA

andyk · Thursday at 6:11 PM

It won’t, I bought a T3 one to try it and it doesn’t work.

It’s a little undersized and that leads to a lot of movement.

takbok · Thursday at 6:26 PM

As far as I'm aware the 595 has the same bolt handle dims as the 590, which has different dovetail dims and angle.

I could look at getting one made to fit but I'm not sure how much demand there would be for it.

Donkey Basher · Thursday at 6:39 PM

andyk said:
It won’t, I bought a T3 one to try it and it doesn’t work.

It’s a little undersized and that leads to a lot of movement.

Thanks for confirming

Better have a rummage around in my spares box to see if I can find an old M595 bolt handle to have a ball put on.

Donkey Basher · Thursday at 6:40 PM

takbok said:
As far as I'm aware the 595 has the same bolt handle dims as the 590, which has different dovetail dims and angle.

I could look at getting one made to fit but I'm not sure how much demand there would be for it.

Thanks but I'll see what I've got in the spares box & hopefully get a ball fitted by modifying a M595 handle.

andyk · Thursday at 6:49 PM

I have a feeling someone (maybe MM Sporting) sell them, but they’re not ball ended, more a ‘tactical’ job - some of which look like grenades.

Greenmist · Thursday at 6:53 PM

I had my M595 bolt handle machined and had one fitted, best thing I ever did, work was done by Alan Maughn who I think has packed in, on a skinflint diy theme I bought a load of cheap plastic ones and fitted them to air rifles and rimfires, they work but lack the refinement

Demetrius · Thursday at 7:22 PM

I have Tikka branded (with logo) rubber push-on's on my 595's.....very nice, and tactile, too...... :norty:

D

Donkey Basher · Thursday at 8:05 PM

Demetrius said:
I have Tikka branded (with logo) rubber push-on's on my 595's.....very nice, and tactile, too......

D

Now there’s a thought

My other M595s variously have hard shiny 20mm & 35mm dia balls on the bolt handle, have never tried the rubber balls - are they smooth or grippy??

andyk · Thursday at 8:07 PM

One thing to have in mind with those is to take them off if you get rained on. When I bought one of my 590s it had one fitted and had trapped water in it, pitting the bolt handle quite badly.

Popa ray · Thursday at 8:18 PM

Demetrius said:
I have Tikka branded (with logo) rubber push-on's on my 595's.....very nice, and tactile, too......

D

I have the same, works well

Donkey Basher · Thursday at 8:27 PM

andyk said:
One thing to have in mind with those is to take them off if you get rained on. When I bought one of my 590s it had one fitted and had trapped water in it, pitting the bolt handle quite badly.

That’s a very relevant comment… the rifle this will be going on is one that will get used when it rains! Think it might be back to Plan A & fit a hard plastic ball on the end of one like the others I’ve got.

Shabz · Friday at 9:18 AM

I have a spare one here if you want it for machining? I’m pretty sure it was replaced by a T3 one which worked fine. It was 15-20 years ago though.

Demetrius · Friday at 9:24 AM

You can pop the Tikka type off easily to check for pitting.....they've used the right material for the job.

D.

Tikka M595 & T3 bolt knobs

Donkey Basher

Well-Known Member

andyk

Well-Known Member

takbok

Well-Known Member

Donkey Basher

Well-Known Member

Donkey Basher

Well-Known Member

andyk

Well-Known Member

Greenmist

Well-Known Member

Demetrius

Well-Known Member

Donkey Basher

Well-Known Member

andyk

Well-Known Member

Popa ray

Well-Known Member

Donkey Basher

Well-Known Member

Shabz

Well-Known Member

Demetrius

Well-Known Member

Similar threads