22 250 zero

[Hulse]

Hello all

i just purchased a remi 22 250 and have been told they hold a good flat projectors as was wondering what to zero it at for best flexibility ?


Thanks

 

[Hulse]

Oops please move to rifles section

 

[baconbuttie]

Mines an inch high at 100 yards, point and shoot for everything up to about 225 yards with 55gn bullets.

 

[AnthonyR]

I zero mine at 250 yards, point and shoot on a fox out to 300 yards

 

[tjwaines]

1 inch high at 100 yards, will be bang on at 200 and 6 inch low at 300, roughly, depending on load.

 

[Eric the Red]

Pretty much the same as the others. 1in high at 100 gives me a 195yd zero, less than six inches at 300 with 50gr - point and shoot at all the ranges I need.

 

[Hulse]

Great thanks guy so 1 inch at 100

 

[jay 22]

Pretty much the same as the others. 1in high at 100 gives me a 195yd zero, less than six inches at 300 with 50gr - point and shoot at all the ranges I need.

Yep same here. Get it stoked up

 

[Dalua]

That is how mine is set also.

 

[Paul at Fechan]

zero to 200m nuff said but use 65gr, just a touch better in the breeze

 

[Dalua]

...but use 65gr, just a touch better in the breeze

Unless you have a rifle like mine, which throws bullets heavier than 50grains all over the place.

 

[jock]

zero to 200m nuff said but use 65gr, just a touch better in the breeze

depends on twist rate it will have to be 1in 10 or below to use these ?