25-06 / 100gr Barnes ttsx Advice!!

[Vinceford]

Looking for some advice regarding Barnes ttsx 100gr in 25-06 call.
Powder type IV got is n165, n550, n140 , or do I need a different powder,
Any data available /advice would be appreciated thanks .

 

[EssBee]

N140 will do it unless you can get reloder 22. My Ruger used to shoot 120g bullets nicely.

 

[deeangeo]

Viht N140 is too fast maybe look at N165 but maybe a little too slow maybe someone will let you have Quickload data for the propellants you have.
I use Viht. N560 with 110gn bullets & works well. Nosler load data suggest Reloder19 or Viht. N160
For 100gn bullets I use IMR4350 (I still have enough for my needs)

 

[takbok]

Rifle reloading data | Handloading | Rifle calibers | Centerfire Rifle bullets | Reload your own ammo - Vihtavuori

Vihtavuori offers rifle reloading data for numerous calibers and bullets for match and hunting purposes. Never exceed maximum loads.

www.vihtavuori.com

N165 should do the trick.

I would load them to the Barnes recommended OAL.

Load Data

Find reloading guidelines and data for your Barnes Bullets products.

www.barnesbullets.com

 

[Scavenger]

Looking for some advice regarding Barnes ttsx 100gr in 25-06 call.
Powder type IV got is n165, n550, n140 , or do I need a different powder,
Any data available /advice would be appreciated thanks .

With 100 grain bullets for 25-06 cal you may be better off with N555, which pretty well replicates H4831SC (unavailable in UK). I have had outstanding accuracy out of N555 and 100 grain bullets. I can share data with you.

 

[sauer]

101grn Barnes LRX in my .25-06 I’m using 51.5 grs N160 &
75 thou ( jump) from “jam”

Paul

 

[Hornet]

If you have some N165 I would start there, case fill will be excellent, I can't offer advice on ttsx bullets as I have never loaded any, I get however, superb results with both N160 and reloader 22 with 100 gn and 117 gn bullets, I have yet to try some N165 but I would expect good results with it.

 

[JockStalk]

N165 all the way with that bullet - about the perfect 100gr copper chambering.

The only powder I found more accurate was Reloader 22 and had a bit more oomph.

 

[croslanda]

I use RS70 and achieve 3500 fps and .25 moa with 100gr TSX, but bear in mind my rifle has a 1:9 twist and a 26" brux barrel.

 

[Sakoodin1]

Rs 62 would work to loaded the same as vit 160

 

[RedLab84]

I load my 25-06
N160 with 80 grn TTSX's, that clover leave and knock roe over very well! I have done some test 100 grn TTSX's but haven't tested them yet. previously ran 100grn soft points very accurately so cant see the copper being any different.

 

[Neilhicking]

Does anyone have load data for ttsx and N165 please?

 

[sauer]

Not ttsx but it's 100grn same weight bullet as a guide with N165 here ...obviously start low and work up
53.0grn minimum
56.5grn maximum
The vhit app is available free for your phone / tablet

Paul

 

[Neilhicking]

Thanks. Any reason ttsx copper would be a different load? Any advice welcome.