Not yet, I need to find a few more hours to dedicate to finishing the design. I am close though!Just wondered if you have an adapter for the Blaser sticks?
Cheers
Gordon
Did you manage to create a mount for the Moejlner Fenris sticks? If so I’d love to buy one. If you need any dimensions I can supply themNot yet, I need to find a few more hours to dedicate to finishing the design. I am close though!
Just struggling to find time with work. I'll try to get it finalised this weekend with any luck
Did you ever get an adaptor made up for mjoelner sticks?Provided you would be happy to drill a 4mm hole where I have circled, then yes I could make them work. I'd also need to know the depth in mm of the small lip where I have drawn the arrow.
Where did you get the clip on one fromJust an aside, I’ve found the “clip-on” style of 5th leg attachment to be very good in the field as it allows me to slide it up and down the leg it’s attached to give a fine elevation control after you’ve quickly set them up on the target.
View attachment 344629View attachment 344630View attachment 344631
It'#s a standard Viperflex 5th leg - I have a CF one and an Al one. I gently heated the clip off the quads with a heat gun and held in pliers until cooled to tighten up the fit. Snaps over the quad leg and provides a taut sliding fit which gives me elevation control without repositioning.Where did you get the clip on one from![]()
Hi there, would this work with 4stable sticks??Hello all,
I was curious what the 5th leg was like on viperflex sticks, however was reluctant to spend £60+ to find out.
So I designed and 3d printed a kit to enable the use of a garden pole for the 5th leg!
It is designed to both pivot and swivel giving maximum usage options in the field.
I have since extensively tested this kit, and am satisfied it can stand up to the rigors of stalking, so as such have decided to advertise for sale.
Please see attached photos for the kit. If you chose to purchase you will receive everything needed for the 5th leg except for the garden pole which will cost about £4. The reason I have opted to exclude this is it would be prohibitively expensive for P&P!
Edit: 13/01/24 - I now have a working product that is compatible with bushwear sticks!
Blaser should be done this week
Please see additional photos added of the bushwear adaptor
14/03/24 - The bushwear adaptor is also compatible with the seeland sticks!
Here's a link to the pole you'll need
![]()
I could probably modify these to suit other brands of quad sticks, so feel free to PM me and we can chat!
Kind regards
KS
See my posts at #16 and #72 earlier in this thread - Viperflex legs fit straight onto the BlasersIf you come up with a design for the Blaser sticks I’d be interested in one please.
I would like to order an adaptor for the Seeland sticks, please could you let me have payment details.Sorry all but not happy with the blaser design currently. I'm back to the drawing board for now!