6.5 creed moderator

[Geordiefarrier]

Can anyone recommend a good quality moderator suitable for a 6.5 creedmoor (Tikka T3X) please?

The weight and size is not an issue I just want maximum noise reduction.

 

[LarryLightFoot]

I have a proofed Stalon X108 very happy with it .

 

[Ludders]

I have a 30 cal ase utra sl5i. Very happy with it. Requires very little maintenance, will last a lifetime and good noice reduction. By getting the 30cal version you can use heavy/ long for calibre bullets with out fear of them clipping the baffles

 

[FISH BOY]

Like a big can for maximum noise reduction and I find better balance.

Have a few Stalons which I really rate, so went for the Stalon X149.

 

[TringSaint]

I have a 30 cal ase utra sl5i. Very happy with it. Requires very little maintenance, will last a lifetime and good noice reduction. By getting the 30cal version you can use heavy/ long for calibre bullets with out fear of them clipping the baffles

I would suggest an ASE utra jetZ compact.
You can get it in 6.5mm calibre and imho it’s quieter than my SL5 on the 243.
It’s also slimmer albeit slightly longer.

 

[LarryLightFoot]

Also see a lot of folks rate the DPT mods worth a look maybe…

 

[2Ll’s]

Can anyone recommend a good quality moderator suitable for a 6.5 creedmoor (Tikka T3X) please?

The weight and size is not an issue I just want maximum noise reduction.

Dpt with magnum plenum and 6 baffles

 

[palo]

A jet z compact in .25 calibre which is recommended for 6.5 on their website.
Could be difficult to get now though as I think they have been replaced with a lighter version. Anty of the stainless steel or steel moderators will probably be quieter than the aluminium ones.

 

[DRN]

Dpt as close to your bore size plus a bit extra for clearance and add extra baffles. If you look up Edinburgh rifles data on his mod test, one of the quietest was a dpt with extra baffles.

 

[JockStalk]

Stalon are good and I rate Jet-z and atec maxim very highly too . I seem to remember Ed at Edinburgh rifles doing a test on a number of models and reporting the results in here if best sound attenuation is the goal. Creed isn’t too boomy though.

 

[Geordiefarrier]

I’ve just switched from a 30-06 which nothing really suppressed.
The moderator on that was a Barton Gunworks which will fit my new creedmoor but I was wanting to try something different.
Had a Stalon x series and wasn’t impressed.

 

[JockStalk]

Thread 'Musings of a Moderator Meddler ....'
https://www.thestalkingdirectory.co.uk/threads/musings-of-a-moderator-meddler.188061/

 

[Eric the Red]

Can anyone recommend a good quality moderator suitable for a 6.5 creedmoor (Tikka T3X) please?

The weight and size is not an issue I just want maximum noise reduction.

For stalking - or range use? If mainly latter then the new Wildcat Elite a serious contender.

 

[Geordiefarrier]

For stalking - or range use? If mainly latter then the new Wildcat Elite a serious contender.

I don’t do any range shooting at all so purely for hunting.

 

[FISH BOY]

Had a Stalon x series and wasn’t impressed.

Can I ask why - what model and calibre?

 

[palo]

I don’t do any range shooting at all so purely for hunting.

You don't really want a heavy moderator on the end of your barrel for hunting. It leaves the rifle very front heavy. Just buy a dpt overbarrel mod. It will be quiet enough

 

[Young Buck]

DPT moderators - lightweight and quiet on mine

 

[PhilSN12]

I have the Ase Utra SL7i on my Creedmoor, works a treat.