Ta!
Oo... yes I can see why you asked - wow, the RS data is very low!
Good to know for me too - I need to work towards non-lead in my 6.5CM
6.5 Creedmoor, Fox 123grn, RS 60 powder
- Thread starter Mike1979
- Start date
Ta!
Oo... yes I can see why you asked - wow, the RS data is very low!
Good to know for me too - I need to work towards non-lead in my 6.5CM
I ll post some info when I get round to sorting the load out
| 6.5Creed | 100gr | CCI200 | RS60 | 47gr | 67.35mm | Proofed |
| 6.5Creed | 123gr | CCI200 | RS60 | 44gr | 67.35mm |
As far as personal experience I developed the loads personally using a Tikka and a Sako rifle.
Starline Brass, CCI and Magtech primers
This is the most accurate of the loads developed
MV dependant on barrel length
Cheers and this is what I will be going for. Have the 123grs sat on my desk...and delivered by you guys
Just a quick update and apologies for the somewhat hillbilly target 
My cases showed slight pressure signs at 44, 43 and 42.5 grains so backed off to 42. All groups are 3 shots at 100 (give or take 5 yards) and all shot prone with a jacket (I know its not exactly professional) under the stock for stability.
Think I ll stick with the 42 grain. load ..just hoping that it wasnt a fluke...but even if it was I ll take it.
My cases showed slight pressure signs at 44, 43 and 42.5 grains so backed off to 42. All groups are 3 shots at 100 (give or take 5 yards) and all shot prone with a jacket (I know its not exactly professional) under the stock for stability.
Think I ll stick with the 42 grain. load ..just hoping that it wasnt a fluke...but even if it was I ll take it.
Rutland lad
Well-Known Member
Looks very good. The bullets work well on deer in my experience. I think you’ll be pleased with the results.
Cheers mate
Similar threads
