Anyone looking for spares?

trev

Well-Known Member
Evening everone,
I'm breaking up some old rifles and shotguns at the moment. If anyone is looking for that odd spring or hammer for that old gun i may be able to help.
A rough list, several .410s and 12g single barrel, 12g s/s under lever hammer gun. Several K98's, a 12g sbs ne, a 45/70 rolling block.
and a couple of old BSA under lever air rifles. a martini action greener 12g.
All parts Free to a good home.

all the best trev.
 

splash

Well-Known Member
Whats the forend like of the Side by side ? I have a top lever hammer gun without a forend
 

trev

Well-Known Member
IMG00466.jpgthe chance of a forend fitting is very slim, but if you want the woodwork or any of the metal work just let me know.
 

Brithunter

Well-Known Member
K98 bits that would be useful:-

Firing pin nut (Cocking piece)
Extractor
Trigger
Sear and spring.
 

Daz2381

Well-Known Member
Hi Trev,

are the .410s the folding hammer type? if so I would like a firing pin to replace mine and stock.

Thanks

Daz
 

splash

Well-Known Member
Hi Trev I was given the gun one barrel out of proof, the forend that came on it looks like it was an old chair leg with a bit of steel and ali on it ! way to ugly to hang on the wall so it only has to look the part.
How much for P&P ?
 

trev

Well-Known Member
Evening Splash,
Like i said its free if its of any use. Just PM your address and its yours.
 

bobjs

Well-Known Member
hi trev.

K98 case extractor,

any old rem 799's im after the extractor off one of them from a 222/223 bolt,

bob.
 

splash

Well-Known Member
Hi Trev
The forend arrived safely saturday and with a little modigication will make my hammer gun Look acceptable .
Thank you for your kindness.

Splash
 

Top