Best NV torch

griff

Well-Known Member
Borrowed a PBIR X from a friend but he now wants it back what would be the equivalent. Gave my Solaris to my lad and he is not for giving it back. So in the market for a new one.
 
Last edited:
Get a ward IR you wont regret it, just specify long or short range, covert or not, I have a long range and a covert one for under a 100 they are spot on. 👍
 
As above, a wraith v3 from ludicrous lumens, better than my pbir. Great service from andy at LL too.
 
Most compact is a Blade. I have Blade and Wraith V 3 and use the Blade on my N470s and ATN Xsight 5.
Original SRX is awesome but roe dont like it at all.
About 2 months ago we tested a Blade v SRX. 772yds looking at a wind turbine. Illumination was pretty identical through N470s. Mate has helmet mounted PVS. SrX beam looked like a laser designated. Blade on max just about descerible beam.
Two roe at 200 yds were very spooked by SRX.
Here is picture of assorted IR torches.
D20260112_152645.webp
 
Is the Wraith v3 variable focus and variable power, is there and is there a red light to say its on ?

Regards
N
 
Most compact is a Blade. I have Blade and Wraith V 3 and use the Blade on my N470s and ATN Xsight 5.
Original SRX is awesome but roe dont like it at all.
About 2 months ago we tested a Blade v SRX. 772yds looking at a wind turbine. Illumination was pretty identical through N470s. Mate has helmet mounted PVS. SrX beam looked like a laser designated. Blade on max just about descerible beam.
Two roe at 200 yds were very spooked by SRX.
Here is picture of assorted IR torches.
DView attachment 466319
Is the Solaris SRX a 940 or 820, and what is the Wraith V3?
 
Wraith has variable control and red light. Wavelength unknown as I purchased it SH.
Will be check SRX. Wraith is v heavy compared to blade.
D
 
SRX details. I think Mk 1View attachment 466480
Interesting. I have had the OG Solaris for absolutely donkeys years and I have never seen that pamphlet as far as I can recall. I just dug my box out (which is covered in dust and is never used despite what your leaflet suggests) and found a pressure switch cable thing in there which then made me go and inspect the torch itself as I didn't realise it had a small port on it to connect the pressure switch on to.

Mad how little we pay attention to things. I have probably used that laser torch hundreds and hundreds of time, maybe even thousands, and never once looked at it closely.

Mine just sits on the side inbetween uses. I live alone so no danger of it falling in to the wrong hands and I always remove the battery from it.

Strangely, last night with it, I experienced the worst floating mist with it I have ever seen. Sometimes you get those floating like bugs that in the distance that almost look like mirage or water trending one way. Last night however must have been very very odd conditions. Thermal wise, it was absolutely stunningly clear and crisp but there also must have been some very very fine humidity in the air that was not causing any issues whatsoever for thermal imaging but was playing havoc with the image being resolved by the Vulpine and the Solaris. I have never seen it that bad. You could still shoot no problem it was almost quite disorientating looking at it for any length of time. Almost felt a bit sick. Normally when it does that, there is obvious humidity in the air but this was not the case. I am guessing it was due to the disparity in temperature between the day and the night. Maybe others experience this a lot if they shoot in late spring/summer but I very rarely shoot between April-Oct, so have never seen it this bad.
 
Its on a Pard Nightstalker pro.
Hi Griff,

The Dark Engine BLADE will work very well with that.


It's the smallest, lightest full power IR on the market. And by full power, it is at 95% of the maximum power legally allowed to be sold to consumers, so the same power as everything else, even much larger, heavier IRs. You'll see a very very long way with it and well into your backdrop.

The lens is designed to match the emitter, so the beam is completely even with no cold or hot spot in the centre so your scope will be able to expose properly. There's also no spill so you won't suffer with reflections off of the barell or moderator.

Mount it towards the rear of the scope on a cheap low QR 1" scope mount at 45 degrees, so that it sits between the turrets and you won't even notice that it's on the rifle.

Designed and made in the UK with a lifetime warranty too.


Cheers





Clive
 
Back
Top