Sold: Boyds Thumbhole Laminate with mag conversion for Remmy 700 £140 posted

[Lone wolf]

Hi guys I have a Boyd's thumbhole laminate stock for a SA Remington 700, comes complete with a magazine conversion, came of a 22-250 so I presume the mag will be suitable for .243 and .308

This also has an adjustable stock for LOP which has been very well done.

Will get some nicer pics when home but heres some to start off

£160 posted

 

[Lone wolf]

Guys if I'm way of the mark with the price please let me know or alternatively throw a offer in as it's just sat in the cupboard doing nothing!

 

[Dorset Deer]

Pm sent

 

[Lone wolf]

Pm sent

Hi I've not received a PM buddy?

 

[Lone wolf]

How about £150 posted, that's a bargain with the mag conversion and adjustable LOP kit on the stock

 

[Lone wolf]

Final price drop £140 posted

 

[Lone wolf]

still here guys grab a bargain

 

[Hairysausagefingers]

Will my AI mags fit it? Looks like the release catch is at the front, not the back.

 

[Hairysausagefingers]

Thanks Lone Wolf, I took my time with the stock and pillar/skim bedded it, plus a bit of re-profiling to get a nice feel for it in my hands. Oil finished it.
It looks good and shoots well.
Thanks for that... Cheers.

 

[kenbro]

Thanks Lone Wolf, I took my time with the stock and pillar/skim bedded it, plus a bit of re-profiling to get a nice feel for it in my hands. Oil finished it.
It looks good and shoots well.
Thanks for that... Cheers.

Show us a picture or it didn’t happen

 

[Hairysausagefingers]

That's very techinal. I'll have a go...

 

[Hairysausagefingers]

 

[kenbro]

Hi Hsf;
It does look good. Did you reproduce the pistol grip somewhat?
Is your scope so high by design for correct cheek weld?
Thanks, Ken.

 

[Hairysausagefingers]

 

[Hairysausagefingers]

I don't undo my action screws for just snyone Kenbro!

 

[Hairysausagefingers]

The mounts gave a decent weld on the old stock and are good on this one too. I tagged a bit on the pistol grip as it felt my hand was slipping off.
I used JB Weld for the bedding and some 0.5" OD aluminium tube for the pillars.
I think it shot about 0.75" group at 125yds off the bonnet with a couple touching, so I've left it alone and used it. Had a couple of foxes last night and it's comforable to handle.

 

[Lone wolf]

Awesome job mate well done! Glad it's gone to a good home!

 

[kenbro]

The mounts gave a decent weld on the old stock and are good on this one too. I tagged a bit on the pistol grip as it felt my hand was slipping off.
I used JB Weld for the bedding and some 0.5" OD aluminium tube for the pillars.
I think it shot about 0.75" group at 125yds off the bonnet with a couple touching, so I've left it alone and used it. Had a couple of foxes last night and it's comforable to handle.

Nicely done bedding job and just over half min of angle off a bonnet is good.
Thanks much for the pictures.
Ken.