Can anyone print me a stock extender?

[12gsnapcaps]

Hi All.

I have an ATA SP sporter in 12 Bore. Right handed. Nothing special but it was cheap, I like it and it hits clays and crows.

However, I am 6"5 tall and generally, a big guy.

The Length of Pull isnt anywhere near long enough. I think I could probably hit more things if the LOP was longer. As it stands, I see lots of rib and my cheekbone hurts after even 10 shots.

I tried a 'slip on pad' but I couldnt get on with it, kept flexing, falling off. Tried 2 different types/brands. Both flexed and/or fell off.

I have contacted stores, shops, emailed ATA, commented on ATA's social media, scoured ebay. I cannot find stock spacers anywhere.

However, I have found a website/person with the 3D print 'specs/blueprints' to '3D print' one. ATA SP Butt spacer by Dunc90

Can anyone advise on anyone who could print me one of these?

Thankyou all.

 

[enfieldspares]

Slip on has the ability to slip off as you've found. Here's a possible work around if the gun has screw on buttplate and that mated to a stock that is flat at the back where the meet and not contoured.

Take off the plastic buttplate and visit a friend with a bandsaw or jigsaw and access to 1/2", 3/4" and such plywood or similar. Draw aroud the buttplate and then cut out that shape described from that plywood. Drill two holes through it using, again, the plastic buttplate as a template.

Acquire two scews the exact same except longer in terms of thread twist as presently hold the existing plastic buttplate to the gun. Now screw all together and go and shoot to see if the 1/2" or 3/4" of whichever you chose works.

Yes your gun will look like a Steyr SSG69 at the back because the spacer is just that and not contoured but it is a quick fix and similar to what Steyr used as it is cheap AND WORKS...add on spacers....until for you and your ATA a more graceful answer is sourced.

 

[takbok]

@12gsnapcaps I can do it for you for a tenner for material and postage. I'd suggest tipping the designer a similar amount.

 

[12gsnapcaps]

Thankyou @takbok I have sent you a DM

 

[The Singing Stalker]

I see a business opportunity there. I am another one who doesn’t get on with standard stocks and slips on things are just shite!

 

[12gsnapcaps]

 

[12gsnapcaps]

Fits like a glove and works spot on, thanks @takbok !!

 

[The Singing Stalker]

How did you work out the angles and curve radius?

 

[12gsnapcaps]

How did you work out the angles and curve radius?

What does that mean?

I just sent him a 3D file I found online

 

[The Singing Stalker]

That answers the question.

 

[takbok]

How did you work out the angles and curve radius?

I would usually trace the profile and measure a length and width dimensions to scale it.

However this was just copying someone's file and making the extender thicker so can't take any credit for the profile.

 

[David.evans]

Unbelievable great work , I had my stock extended, and it only cost £285/00 ffs