Coiled Electrical Extention Lead
- Thread starter User00004
- Start date
widows son
Well-Known Member
I need to rewire my LightForcewhere is a recommended place to buy the coiled extention lead from? For those that have done it, anything to be careful of?
Thank You
TJ
CEF there's one in Elgin and Inverness ,or CV components harbour road Inverness or try Highland Industrial supplies sea field road
TJ It's probably cheapest to buy a ready made up ciggy lighter extension cable & chop it to suit your needs - That way you'll end up with some spare connectors.
Ian
Ian
I rewired one with .75mm2 flex and did away withe coiled wire as it was doing my napper in.
The flex seems to rattle less when moving the lamp and hangs better if on foot, not flapping as much if there is a bit of a blow on the go either.
always an option if you have no luck with the coil
The flex seems to rattle less when moving the lamp and hangs better if on foot, not flapping as much if there is a bit of a blow on the go either.
always an option if you have no luck with the coil
paul o'
Well-Known Member
this may help you out feller
try DEBAN £8 odd for flex for tracer 2mt (0)1394 387762 or any mapplin electronics store i replace mine with hoover flex and will not over heat
try DEBAN £8 odd for flex for tracer 2mt (0)1394 387762 or any mapplin electronics store i replace mine with hoover flex and will not over heat
I need to rewire my LightForce
Thank You
TJ
TJ what size bulb is in your lamp? 10 Amps @ 12 Volts = 120Watts. Aren't most lamps 55 Watts? Mine are!
55 Watts @ 12 Volts is less than 5 Amps. - Plenty of 5 Amp leads on't Fleabag.
Ian
55 Watts @ 12 Volts is less than 5 Amps. - Plenty of 5 Amp leads on't Fleabag.
Ian
Not mine, I have a 100w bulb in mine.
Similar threads
