CZ452 mounting a thermal

[JockStalk]

If you’ve mounted a thermal to a cz452 .22 with an 11mm dovetail I’d be interested to know what mounting option you went for that is secure and puts the scope back far enough to get a good view of thermal screen.
It’s a 30mm tube thermion

 

[wheelie]

These adapters work well .Purchased off ebay .

 

[snake_2586]

I would have thought normal 11mm 30mm rings but if you need to move it further back or forward then something like this:

Hawke Reach Forward 30mm High 9-11mm Dovetail Mounts #22122 | eBay UK

Hawke reach forward 30mm high mounts to fit 9-11mm dovetail rails. Gives 25mm extension.

www.ebay.co.uk

 

[mealiejimmy]

If it's a traditional tube style scope then pretty much any standard dovetail scope mounts will do the job
If it's a "hanging off the back of the rifle" style scope that needs a picatinny rail like the HIK Thunder, then you'd be best off with a Britannia rails model 1-0019 extended picatinny rail for CZ rimfire rifles

Cheers

Bruce

 

[JockStalk]

These adapters work well .Purchased off ebay .

You’ve reminded me - now where the **** are they…..?

 

[D3ave]

Mine has a Britannia rail but not extended

 

[JockStalk]

I would have thought normal 11mm 30mm rings but if you need to move it further back or forward then something like this:

Hawke Reach Forward 30mm High 9-11mm Dovetail Mounts #22122 | eBay UK

Hawke reach forward 30mm high mounts to fit 9-11mm dovetail rails. Gives 25mm extension.

www.ebay.co.uk

Tried the other options and either too high or too shoogly. Will order a set of these and see how that goes. Thanks for ideas folks

 

[JockStalk]

I would have thought normal 11mm 30mm rings but if you need to move it further back or forward then something like this:

Hawke Reach Forward 30mm High 9-11mm Dovetail Mounts #22122 | eBay UK

Hawke reach forward 30mm high mounts to fit 9-11mm dovetail rails. Gives 25mm extension.

www.ebay.co.uk

Bought a set from Countryman’s and they arrived today - top job from countryman’s.

Fitted just now, absolutely cracking - eye relief is spot on and they are a good solid fit (for rim fire anyway).

My other options had too many interfaces and parts. This is just dovetail/ mount, which is what I was after.

Thanks for the tip - just what I was after

 

[andy R204]

I bought the Picatinny version for Alpex.As said gives you plenty of scope for the correct eye relief.
I will be swapping between the rimfire & AA S510 XS.
Currently using Picatinny blocks but will try the snap in Dovetail mounts to lower the scope height a bit.