The Ugly Annealer is a gas-flame annealing machine for your brass cases. Annealing your cases will lead to longer case-life, and more consistent reloads (i.e. lower ES and SD), and with the Ugly Annealer this process is now affordable to all within the reloading community!
The machine case is made of #201 stainless steel, with the clear front panel being impact-resistant polycarbonate - costing 3x as much as acrylic but being nearly indestructible.
The standard package includes 5 CNC milled caliber conversion inserts covering:
223REM
7.62*39mm
308WIN
300WM
338LM
and finally.....50BMG when used without any inserts.
The rotation wheels should last a lifetime as the aluminium is heat resistant and are nickel coated with natural diamond grit for a permanent nonslip coating.
The package includes two wheels - a 25mm wheel for most cases, and also a 15mm wheel for shorter cases such as 6mmBR.
The machine comes with a CNC-made adjustable clamp compatible with gas pencil torches with an OD 12.70mm-13.0mm (such as the Bernzomatic) and a universal propane bottle holder is also included for when using other gas torches (such as the Fine Flame).
The motor used is also high quality, and should be able to anneal at least 900,000 brass (at 10 pieces per minute) or an average 1500 hours run time (at max speed without stalling) before replacement is needed.
What’s inside the package:
• 1 x assorting box with spare springs, screws, c-clips etc
• 1 x set of quality Allen keys
• 5 x CNC-made caliber inserts shown in the photo. compatible with common calibers 223REM, 7.62*39mm, 308WIN, 300WM, 338LM
• 1 x universal gas bottle stand
• 1 x gas nozzle clamp
• 1 x polycarbonate guide panel
• 1 x brass rolling ramp
• 2 x nickel diamond coated wheel, in 15mm and 20mm thickness
• 1 x CNC-made catching wheel with 50BMG slot
• 1 x user instruction
• 1 x power adapter
• 1 x Ugly Annealer main body, with bottom plate
• 1 x accessories pouch
The only thing you'll need is gas (we recommend any commercial 400g bottle of Propane) and a gas torch (available separately on the website).
AVAILABLE IN SILVER, OR NEW UK ANODISED COLOUR
www.Derraco.co.uk
The machine case is made of #201 stainless steel, with the clear front panel being impact-resistant polycarbonate - costing 3x as much as acrylic but being nearly indestructible.
The standard package includes 5 CNC milled caliber conversion inserts covering:
223REM
7.62*39mm
308WIN
300WM
338LM
and finally.....50BMG when used without any inserts.
The rotation wheels should last a lifetime as the aluminium is heat resistant and are nickel coated with natural diamond grit for a permanent nonslip coating.
The package includes two wheels - a 25mm wheel for most cases, and also a 15mm wheel for shorter cases such as 6mmBR.
The machine comes with a CNC-made adjustable clamp compatible with gas pencil torches with an OD 12.70mm-13.0mm (such as the Bernzomatic) and a universal propane bottle holder is also included for when using other gas torches (such as the Fine Flame).
The motor used is also high quality, and should be able to anneal at least 900,000 brass (at 10 pieces per minute) or an average 1500 hours run time (at max speed without stalling) before replacement is needed.
What’s inside the package:
• 1 x assorting box with spare springs, screws, c-clips etc
• 1 x set of quality Allen keys
• 5 x CNC-made caliber inserts shown in the photo. compatible with common calibers 223REM, 7.62*39mm, 308WIN, 300WM, 338LM
• 1 x universal gas bottle stand
• 1 x gas nozzle clamp
• 1 x polycarbonate guide panel
• 1 x brass rolling ramp
• 2 x nickel diamond coated wheel, in 15mm and 20mm thickness
• 1 x CNC-made catching wheel with 50BMG slot
• 1 x user instruction
• 1 x power adapter
• 1 x Ugly Annealer main body, with bottom plate
• 1 x accessories pouch
The only thing you'll need is gas (we recommend any commercial 400g bottle of Propane) and a gas torch (available separately on the website).
AVAILABLE IN SILVER, OR NEW UK ANODISED COLOUR
www.Derraco.co.uk
