FAKE atlas bipod, (think iv just bought one

[Tikkat1x]

Evening all,

any one help determine if iv bought a fake or not, looking at a video on youtube, reading a few thing and looking at some pictures, i think i have, but i maybe wrong,
the model in question is a

BT10-LW17 V8,​

some of the things iv picked upon are there's no rim on the collar rims, the position plate looks like it pressed metal rather than machine cut from a plate of solid steel,
the tightening knob is not like the ones iv seen that are real, but like all the fake ones iv seen, there is no branding on it in the usual place,

like i say, i could be wrong,

 

[Tikkat1x]

The best way to make sure you are getting an authentic Atlas® Bipod is to order through an Authorized Stocking Retailers or directly from B&T Industries. If you suspect you may have purchased a counterfeit product, you may send us a photo of your product and we can confirm if it is a genuine B&T product or a counterfeit. Please, send this information to customerservice@accu-shot.com.
Visibly, there are six main ways to distinguish between an authentic Atlas® Bipod and a counterfeit. Please, reference the image below. The bipod on the left is an authentic Atlas® Bipod, while the bipod on the right is a counterfeit/copy/fake/knockoff (CCFK):

1. Look at the overall quality of machining, surface appearance, fit and finish. In particular, the Leg Bolt (1), Position Plate (2) and Position Button (3) on an authentic Atlas® Bipod has heat-treated stainless steel components, which is characterized by the dull finish versus the shiny, reflective, chrome-like plated surface on a ccfk leg bolt (1), position plate (2) and position button (3).
2. The Position Plates (2), on an authentic Atlas® Bipod are machine cut from a solid sheet of stainless steel then heat treated, while the counterfeit’s position plate is stamped out of a sheet of an unknown material then plated with a shiny, reflective chrome-like finish.
3. The overall finish (6) on an authentic Atlas® Bipod is comprised of 6061-T6 aluminum that is Type 3 hard coat Mil-Spec anodized. This process hardens the surface making it extremely durable and therefore difficult to corrode or scratch, while the ccfk’s overall finish (6) is comprised of an unknown material, appears as a shiny black, and easily scratched. Authentic Atlas® vs. Counterfeit: material and finish
4. Current production, authentic Atlas® Bipods will have a ridge on the collar (5), while some counterfeits will not. It is extremely important to note that the early versions [V7] Atlas® Bipods do not have a rim ridge on the collar. For this reason, an accurate distinction cannot be made by looking at the collars alone and other features must be taken into account.
5. As of the middle of 2019, all authentic Atlas® Bipods are engraved on one side of the base (4) with an arrow (if appropriate), “ATLAS®” followed by the series, “accu-shot.com/pat” and “PATENTED.” CCFK’s will either have the same words, a variation of those words or none of those words stamped onto the base (4).
6. As of the beginning of 2020, all authentic B&T products come in a clear plastic bag with chipboard backing. CCFK’s often come in a box.

 

[Kyle_hill98]

That’s a fake mate…

 

[Tikkat1x]

That’s a fake mate…

thought as much, iv let the seller know, sure he will refund me, but was hoping i was wrong

 

[hendrix's rifle]

Im curious to what you paid for it if you don't mind me asking?

 

[Tikkat1x]

£80. That’s should of rung alarm bells I know. And it did. But off here from a 14 year member. Thought I was pretty safe. The seller my well not of even known.

 

[Pellet Pinger]

Fake 100%

 

[Cogswell & Harrison]

Yes, it's a fake I'm afraid. This is one of its siblings available from Uttings.

AirForceOne ADRAS Tilt & Swivel QR Lever Bipod

AirForceOne ADRAS Tilt & Swivel QR Lever Bipod. Using superb quality alloys and stainless steel throughout its construction, its finish is beautifully hard anodised in Matte Black or Champagne Sand. Extending between 5' and 9', It's totally feature packed, including a 'Quick Release' Lever for...

www.uttings.co.uk

That said, with a bit of work they can be brought up to a certain level of functionality as I know all too well

 

[Jagged77]

I’ve never handled or used one of the fake ones but I can assure you the real ones are well worth the money. I have three!

 

[Tikkat1x]

All sorted now

 

[kev1988]

Aii definitely fake, the "cogs" on the real ones are loads thicker, the fake ones tend to be press cut rather than machined, you can really feel the difference between the real ones.
Glad ya got it all sorted!