loiner1965
Active Member
not my idea but is a great tip....
remove the bottom of your fired case and smooth the edges....insert a piece of tubing and glue into postion .
so basically you have a length of tubing with a case glued to the end...
just insert case into chamber and connect tube to tin.....no more mess in the rifles internals.
you can do this to each of your rifle calibres
remove the bottom of your fired case and smooth the edges....insert a piece of tubing and glue into postion .
so basically you have a length of tubing with a case glued to the end...
just insert case into chamber and connect tube to tin.....no more mess in the rifles internals.
you can do this to each of your rifle calibres
