Glass bedding Mauser M12

[Hunter 6.5]

Hi everyone, decided to go ahead with glass bedding of my Mauser M12. Have done two other rifles before but this is quite different. I am confused how to proceed with recoil lug. Also there is factory screwed pillar at the rear but at the front is a short gap between bottom plate and the place where front screw goes in(it's like a pillar permanently attached to the action, but short)
Any advice and ideas are welcome!

 

[Mauser12guy]

Hi everyone, decided to go ahead with glass bedding of my Mauser M12. Have done two other rifles before but this is quite different. I am confused how to proceed with recoil lug. Also there is factory screwed pillar at the rear but at the front is a short gap between bottom plate and the place where front screw goes in(it's like a pillar permanently attached to the action, but short)
Any advice and ideas are welcome!

Reviving this old question... did you ever get it bedded? Im considering it, but like you mentioned the front Lug and 1/2 sized post are unusual. I think the M12 would benefit from bedding as the stock is slightly flexible.

 

[Hunter 6.5]

No mate,and traded in back for 270win

 

[Mauser12guy]

Ok no worries, thanks.