Hatsan escort magnum xtremeMAX extraction issue

[DJJay]

I have an issue with my Hatsan semi auto in that it fires first shot but fails to extract. I think I have located the issue / part of the issue in that the extractor spring and guide are not in contact with the extractor. Would this cause this problem ?

The issue there is they appear to be stuck/ probably rusted in position.

Has anyone had this and been able to get them out or does anyone have any tips I’ve soaked them as much as possible with cleaner but it doesn’t seem to be doing anything.
Next thing is does anyone know where to get new parts for this model ?
I’ve tried tapping the guide pin to release it but that’s not working.
Would an ultrasonic cleaner be a good or bad idea ?

 

[Smellydog]

Its rusted in. That's my bet.
Try warming the bolt but not the extractor tip. Use a blow lamp but very slowly. Keep adding thin oil.

 

[bullet chucker]

Sportsman Gun Centres now are the importers of Hatsan Shot Guns.

BC.

 

[Heym SR20]

Give it a good clean and lubrication. Semi autos have little tiny coil springs in the mechanisms and trigger groups. These are susceptible to rust and dirt and gunk. I would not strip it all apart - those wee springs will find a much more comfortable home in the far corner of your kitchen, workshop or living room. Instead give the actions a good blast with a good gun oil and blow of the excess.

 

[Mike L]

Knibbs in Scotland, airgunspares.com have lots of hatsan spares.