Hausken moderator cleaning

[Paul101]

I’ve had a Hausken moderator at the back of my cabinet for a few years and I’ve decided to clean and use it, only to find it’s seized.
I’ve tried the disassembly tool to no avail.
Has anyone got any suggestions to clean it.
Thank you

 

[Andyquadra]

Soak it in diesel fir a few days

 

[12gsnapcaps]

Post it to someone else to clean, now we have the new laws?

Perhaps this could be a business opportunity.

'Silencer detailer'

Probably a better name than stiff tube polisher

 

[12gsnapcaps]

Joking aside, as Andy said, soak it in diesel. If that then still doesn't work, repeated liberal applications of kroil or another high quality specialist penetrator oil (NOT wd40)

If that still doesn't works tape it to the end of a stick and use it to hit rabbits over the head

 

[Scottb123]

50 50 diesel and atf mix will free it right up

 

[Border]

Don't.
Quick spray of WD40 or ballistol and then air dry or radiator if wet.

 

[Paul101]

Soak it in diesel fir a few days

Good idea, then I can pop to the village garage to blow it out.

 

[homer]

I’ve had a Hausken moderator at the back of my cabinet for a few years and I’ve decided to clean and use it, only to find it’s seized.
I’ve tried the disassembly tool to no avail.
Has anyone got any suggestions to clean it.
Thank you

Dont bother

 

[the scudd]

As has already been said just give it a squirt of Ed 40
I have one for almost 8 years and that’s all I have ever done

 

[ejg]

I soak them in very hot soap water for a few hours, flush with hot water then blow out dry in oven and soak with WD40 or similar. Blow out again. Mostly only clean after drilling baffles larger. After shooting I spray WD or similar and run a test tube brush through.
edi