Hikmicro Alpex not picking up IR

1967spud Reloading Supplies Ltd - UK Suppliers for Reloading Equipment supplies, We also stock Bullet Heads and Bullet Cases Guns Cabinets, Night vision and much much more...
M

Mike1979

Well-Known Member
Anybody had any issues with their scope not picking up the IR output?

About 2 weeks ago my Alpex decided it didnt like the IR and the image for obvious reasons wasnt good.

Initial thought was an issue with the IR which is a Ward Dark Engine Blade . Tried the IR with my Zulu and no issue so tried a NM 800 and NM 400 with the zulu and all worked fine. Went back to the Alpex and no joy.

I factory reset the unit and still had the issue, cycled through night modes and automatic mode and still had the issue. Sent back to Elite Optics and they tested it and apparently all was fine...had it back and same issue.....Image during the day is spot on both in day and night mode, I also make sure I select the correct shutter setiing for day and night.

Im going to check it again tonight and maybe leave the unit of for a bit before I see what its doing.

Anyone experienced this and what was the outcome?

Any thoughts are welcome
 
Thats weird eh Mike? Did Elite optics not offer any suggestions, did they say what iluminator they used? Is it whiting out?
 
I was going to suggest manually selecting night mode rather than auto as sometimes mine can be slow to change over... but seems you've tried that!
 
Mike1979 said:
Well that was really worth posting Tim. I put you on ignore for a reason so maybe dont post unless you have something worthwhile to say...which is very unlikely.
Click to expand...
You sound like 75 he posted (right you are going on the ignore list) next day he popped in with a comment lol

As I said you have no will power :doh:
 
BenBhoy said:
Thats weird eh Mike? Did Elite optics not offer any suggestions, did they say what iluminator they used? Is it whiting out?
Click to expand...
Elite said they tested it with a new Hik IR and also tested it at distance and it was fine.... I appreciate I may be thick but I know my way around the scope :)

Im picking up a 4th IR from the shop I bought the scope from tonight so will see if that helps...will also leave the scope on for 5 mins before i try it.

The issue is the opposite of white out...you can see the IR beam when you turn it on but its really faint...and the battery is fully charged :lol:
 
farrieral said:
I was going to suggest manually selecting night mode rather than auto as sometimes mine can be slow to change over... but seems you've tried that!
Click to expand...
Agreed and tried every mode about 5 times before I did a factory reset (and lost all my saved parameters).

Elite said it may be an intermittent fault but its frustrating. It worked perfectly up until it didnt and there is nothing that has changed.
 
Mike1979 said:
Elite said they tested it with a new Hik IR and also tested it at distance and it was fine.... I appreciate I may be thick but I know my way around the scope :)

Im picking up a 4th IR from the shop I bought the scope from tonight so will see if that helps...will also leave the scope on for 5 mins before i try it.

The issue is the opposite of white out...you can see the IR beam when you turn it on but its really faint...and the battery is fully charged :lol:
Click to expand...
Can you take scope with you to shop? Two heads & all that
 
BenBhoy said:
Can you take scope with you to shop? Two heads & all that
Click to expand...
The irony is that I was in Devon last week (Elite are in Exeter) ....

Ran through the menu at my local shop but the issue is that the long days mean it would be difficult for them to view it with IR after dark.

I ll try again tonight and if it doesnt behave its going back to Elite...even if I have to go back to Devon so I can witness it for myself if there is nothing wrong :) 👍
 
Mike1979 said:
Anybody had any issues with their scope not picking up the IR output?

About 2 weeks ago my Alpex decided it didnt like the IR and the image for obvious reasons wasnt good.

Initial thought was an issue with the IR which is a Ward Dark Engine Blade . Tried the IR with my Zulu and no issue so tried a NM 800 and NM 400 with the zulu and all worked fine. Went back to the Alpex and no joy.

I factory reset the unit and still had the issue, cycled through night modes and automatic mode and still had the issue. Sent back to Elite Optics and they tested it and apparently all was fine...had it back and same issue.....Image during the day is spot on both in day and night mode, I also make sure I select the correct shutter setiing for day and night.

Im going to check it again tonight and maybe leave the unit of for a bit before I see what its doing.

Anyone experienced this and what was the outcome?

Any thoughts are welcome
Click to expand...

Proper glass doesn’t have an issue with an IR
 
Mike1979 said:
The issue is the opposite of white out...you can see the IR beam when you turn it on but its really faint...and the battery is fully charged :lol:
Click to expand...
Mine has done this a few times but only on initial switch on of IR ...

I just press the switch on the IR again and it works fine after that , I just thought it was a dodgy on switch .

Maybe just bin that torch.
 
Nickb said:
Mine has done this a few times but only on initial switch on of IR ...

I just press the switch on the IR again and it works fine after that , I just thought it was a dodgy on switch .

Maybe just bin that torch.
Click to expand...
I've tried it with 3 IR torches that all light up the world when I checked with the Zulu so dont think its the torch. I ll try with the 3 of mine and the PBIR from the gun shop and see what happens....weird 👍
 
buckfever said:
Sorry can't help with issue but when testing it tonight if it isn't working then record it on scope. You can then show it to elite. Least that way you have proof it isn't working if they say there isn't a problem
Click to expand...
Thats a good suggestion 👍

Im glad I download all the images I want to save...as the reset cleared everything :(
 
You must log in or register to reply here.

Similar threads

Night Master NM1 SL IR feedback
Replies
2
Views
117
Blade929
Blade929
IR Illuminator recommendations for Hikmicro Alpex 4k lrf
2
Replies
23
Views
2K
stevekennedy
S
HikMico Alpex 4K LRF full set up
Replies
6
Views
758
The Singing Stalker
The Singing Stalker
Zulus 30mm 4K vs HIK Micro 4K Review
Replies
14
Views
1K
Cottis
C
Alpex 4k left
Replies
8
Views
747
Keith Edmunds
Keith Edmunds
Browning X Bolt 2 Cashback
Back
Top