I've decided to sell my creedmoor due to picking up a lightweight 7mm.
Howa 1500, trigger has been lightened with the gunbloke spring kit to around 2lb.
MDT XRS chassis with a 10 round magazine.
Stalon x108 mod I believe it is. Cracking mod for noise reduction and it's light weight.
Fired between 200-300 rounds, some factory (maybe 40) and the rest reloads. I have 2 loads worked for it, one using 130g sierra gamechangers and the other using yew tree 114g TLR. Both are accurate and both give half MOA without much fuss.
The paint won't be everyone's cup of tea but I never intended on selling! I wanted something slightly harder wearing than the blueing it had as a factory finish, they seem to have changed it... Owned from new by me since late 2020 and always cleaned before going in the cabinet.
I'm after £800 all in, I'll pay RFD fee my side if needed.
I will throw in any 6.5 bits I have. Hornady dies, brass, bullets (unsure how many I have left but there's probably half a box of gamechangers and a maybe 20-25 yew tree), ogive insert, shoulder bump gauge. I may even have some primers to go with.
There will be some federal factory ammo along with an unknown number of reloads with the gamechangers and yew tree ready to go (maybe 50 or so)
I also have the factory stock to go with it and bottom metal although not the drop box insert as that's in another howa.
I'd rather it be collected as then all ammo can go with it. I have powder left which I will give first dibs to the buyer at a massively discounted price, I can't use it in any of my other rifles so no point having it.
The picture of the target is the first 5 shots fired with factory federal ammo in the standard stock.
Any questions drop me a message,
Cheers
Howa 1500, trigger has been lightened with the gunbloke spring kit to around 2lb.
MDT XRS chassis with a 10 round magazine.
Stalon x108 mod I believe it is. Cracking mod for noise reduction and it's light weight.
Fired between 200-300 rounds, some factory (maybe 40) and the rest reloads. I have 2 loads worked for it, one using 130g sierra gamechangers and the other using yew tree 114g TLR. Both are accurate and both give half MOA without much fuss.
The paint won't be everyone's cup of tea but I never intended on selling! I wanted something slightly harder wearing than the blueing it had as a factory finish, they seem to have changed it... Owned from new by me since late 2020 and always cleaned before going in the cabinet.
I'm after £800 all in, I'll pay RFD fee my side if needed.
I will throw in any 6.5 bits I have. Hornady dies, brass, bullets (unsure how many I have left but there's probably half a box of gamechangers and a maybe 20-25 yew tree), ogive insert, shoulder bump gauge. I may even have some primers to go with.
There will be some federal factory ammo along with an unknown number of reloads with the gamechangers and yew tree ready to go (maybe 50 or so)
I also have the factory stock to go with it and bottom metal although not the drop box insert as that's in another howa.
I'd rather it be collected as then all ammo can go with it. I have powder left which I will give first dibs to the buyer at a massively discounted price, I can't use it in any of my other rifles so no point having it.
The picture of the target is the first 5 shots fired with factory federal ammo in the standard stock.
Any questions drop me a message,
Cheers
