ID this moderator ?

[kenbro]

Hi, Can anyone id this moderator please?

 

[HonestJohn]

I could be wrong, and hope I am; but possibly an air rifle moderator?

 

[kenbro]

There’s some evidence of gas cutting on the two front baffles and the innards rattle when it’s shaken.
I’ve taken all the innards out and relaxed them from the opposite end and now it doesn’t rattle!
Unsure which is correct way to assemble it, hence asking for id.
Thanks, Ken.

 

[HonestJohn]

If anyone will know instantly, I suspect Ed @Edinburgh Rifles

But we can’t keep tagging Ed in as he has a business to run as well of course.

 

[kenbro]

I’ll test it at the range on Sunday!
Thanks, Ken.

 

[Edinburgh Rifles]

got one here but know idea what its called!
lots of these type popped up in the late 90s early 2000s as one man in a shed knocked them up on small lathes

proofs in the pudding but suspect unless the bore to calibre tolerance is tight it will be as noisy as the one we have!

 

[Greenmist]

Internals look like A-tec

 

[HonestJohn]

Internals look like A-tec

Very good point Sir!

M

Thread 'A-Tec moderator replacement'

May 1, 2009

I am in the market for a moderator and I was tempted by an A-Tec (the semi-reflex style rather than the CMM). I personally like the reflex style which offers a second bearing point and not excessive protrusion in front of the barrel; they are much lighter than the T8, PES T12 or Wildcat alternatives and have a reputation for being quiet.

And Thar rates them!

Anyway I noticed from A-Tecs Norwegian website; http://www.a-tec.no/ that the range has changed from that which Bruce Potts reviewed in Sporting Times in May'08. The quietest reflex style model the TMM - 4 is now only 400gm...

• mallettn
• Replies: 9
• Forum: Rifles & Calibres

 

[kenbro]

got one here but know idea what its called!
lots of these type popped up in the late 90s early 2000s as one man in a shed knocked them up on small lathes

proofs in the pudding but suspect unless the bore to calibre tolerance is tight it will be as noisy as the one we have!

Thanks Ed.
Ken.

 

[farmer7]

Hi, Can anyone id this moderator please?

It's a J-TEC Ranger, Jager Sporting Arms.

 

[HonestJohn]

Aha!

J-TEC Ranger fullbore moderator

Pete Moore checks out the latest, in-house moderator from Jager Sporting Arms and finds a rather familiar design at good money

www.gunmart.net

 

[kenbro]

It's a J-TEC Ranger, Jager Sporting Arms.

Nice one, I thank you, Ken.
Ps. Looks like I reassembled it correctly going off that picture.

 

[Jagged77]

The internals look almost identical to the SYSS Sportac mod

 

[kenbro]

This one of mine had been assembled (As I suspected) ass backwards, plus the 2 stainless baffles that should have been first in (Nearest the muzzle) were in the wrong order so now two of the Ali. baffles have some gas cutting, not too bad so should be good for many more rounds.
KB.