Locked gun cabinet removal

[Hambone]

If you have enough room to get around the edges then splitting wedges (wooden or metal) drifted in will pull most fixing bolts, as said in a previous post "chem fix" will allow the hole to be used again if needed. 30 years of a growing collection has left me with probably more resin than mortar

 

[Trickyd66]

Am I not the only one wanting to see it actually opened to ensure it is empty

 

[Mickeydredd]

Am I not the only one wanting to see it actually opened to ensure it is empty

I am assured it is

 

[Trickyd66]

I am assured it is

You don't know for sure though do you ?

 

[VSS]

Am I not the only one wanting to see it actually opened to ensure it is empty

I was just about to post the same!

 

[enfieldspares]

I am assured it is

Maybe it hides a secret way through to another place? I await the update. "The lion the witch and the gun cabinet".

Sod's law also says there's the spare set of its keys inside it!

 

[Hambone]

Maybe it hides a secret way through to another place? I await the update. "The lion the witch and the gun cabinet".

Is the OP a closet Mr Benn?

 

[Mickeydredd]

Well if it is filled with gold bars you may not hear from me again…..

 

[VSS]

I shall be disappointed if it doesn't at least contain a live round of some obscure calibre that the OP most certainly doesn't have the authority to possess.
That'll probably generate a whole new thread!

 

[Tim.243]

Well if it is filled with gold bars you may not hear from me again…..

Watch his videos

 

[Trickyd66]

Well if it is filled with gold bars you may not hear from me again…..

Sorry to ask, but do you have power tools etc to use, or would you have to beg, borrow, hire, or buy? Only asking as a lot of SD members have most kit kicking about through employment.

 

[Mickeydredd]

Sorry to ask, but do you have power tools etc to use, or would you have to beg, borrow, hire, or buy? Only asking as a lot of SD members have most kit kicking about through employment.

Not through employment, but yes I have all the tools mentioned on here.

 

[enfieldspares]

Well if it is filled with gold bars you may not hear from me again…..

Good. I hope very much it is. 'Cos we all hate you.

 

[25 Sharps]

A locksmith will charge you more than a brand new cabinet ! Do it yourself. Dust sheet everything well, wear ear muffs, eye protection, and a mask. Take your time, and use a thin metal cutting disk in an angle grinder. It will be a lot of damage to open it and I do not think it will be readily re-usable for ammo storage or anything. Junk it..

£65 to sort mine when one of the locks failed, not getting another 10 gun cabinet for that….

 

[Rake Aboot]

Buy a pick set. Watch YouTube and open the thing yourself, then replace the locks

 

[cooksey]

One I knew of they took a reciep saw to top and bottom on the hinge side and cut the door comes away then

 

[old 30-06]

25 Sharps..................Fair play to you. They wanted £100 cash to turn up at my door, let alone do anything ! £65 to do the job was a result.