Looking for quality Dovetail 1 inch rings

[Lars Munk]

Hi.
I’m looking for good quality Dovetail rings. 1 inch and minimum 13 mm high from base to lower part of the ring. So high.
I would prefere steel rings.
They can be used or new.
I Hope someone can help.
BR.
Lars

 

[Stevie/P]

for what size dove tails 11mm by any chance .

 

[Lars Munk]

Hi.
Yes 11mm.

 

[Stevie/P]

Hi.
Yes 11mm.

I may have some steel ringmounts I'll have a look .

 

[Mike_E]

11.5mm enough??

For Sale: - Burris 11mm/Rimfire mounts - 1" steel

Hi, I have a set of Burris steel mounts to fit a 9-11mm dovetail (aka rimfire/airgun) which are basically brand new. Bought 2 months ago but never been used other than to zero the rifle. Hard to get in Europe but opticstrade has them and they are £62 delivered to your door. Height is 11.5mm to...

www.thestalkingdirectory.co.uk

 

[Lars Munk]

Hi.

11.5mm enough??

For Sale: - Burris 11mm/Rimfire mounts - 1" steel

Hi, I have a set of Burris steel mounts to fit a 9-11mm dovetail (aka rimfire/airgun) which are basically brand new. Bought 2 months ago but never been used other than to zero the rifle. Hard to get in Europe but opticstrade has them and they are £62 delivered to your door. Height is 11.5mm to...

www.thestalkingdirectory.co.uk

Hi. No they have to be a minimum of 13 mm from top of the base to the lower part of the ring. Its for a 50 mm lens

I may have some steel ringmounts I'll have a look .

cheers!

 

[Stevie/P]

Hi.

Hi. No they have to be a minimum of 13 mm from top of the base to the lower part of the ring. Its for a 50 mm lens

cheers!

I have these if any use.

 

[Lars Munk]

I have these if any use.

I’m affraid they wont fint my Anschutz, since its not flat on the top like tikke/sako. But thanks anyhow!

 

[Stevie/P]

I’m affraid they wont fint my Anschutz, since its not flat on the top like tikke/sako. But thanks anyhow!

your welcome hope you find some.