New Dark Engine BLADE IR Illuminator
- Thread starter Clive Ward
- Start date
Overlay
Well-Known Member
this is what i’m using, work perfectly, i did put a spring loaded adjustable QD mount on the torch I’m running both NM torches and they work just fine
Lloyd90
Well-Known Member
Is it just that 30mm one on the right? What about the mount that the blade sits in?
got a link for the mount please mate?
Overlay
Well-Known Member
i’ll have a look when I get back home, it has a standard nut type torch fastener with a nylon spacer ring to fit the IR irrespective of the torch tube size, the qd unit fits on the picatinny via a push spring to fit then screw the nut to tight and it locks in 100 % solid or just leave it on the spring tensionerIs it just that 30mm one on the right? What about the mount that the blade sits in?
got a link for the mount please mate?
i think i got mine from clive ward but will check
it’s worth giving clive a ring he will get you sorted
Night òwl
Well-Known Member
The C50 sensor regulates the amount of IR what us used , so if you what you have fills the screen etc there will be no advantage
steve1833
Well-Known Member
Really like the compactness of the blade, my current does not completely fill the screen even when focussed right back.
Pellet Pinger
Well-Known Member
Lloyd90
Well-Known Member
How do you adjust / centre the beam?
You centre the beam in the field of view using an adjustable mount like that supplied by Ludicrous Lumens or a Burris Zee ring
Turning the bezel at the front of the torch tightens or widens the beam
Cheers
Bruce
@Clive Ward these are showing on your website as 30 days lead time? Is this correct please
Problem is last thing I ordered off @Clive Ward didn’t turn up for 2 months, then no answer on the phone or email for another month dispite asking quite forcefully to cancel the order, then the item turned up about 4 months from original order.
Lloyd90
Well-Known Member
Whys the reason for the Burris ring please mate? Are you able to move the torch about before tightening up or something?
Thanks for your help
The Burris Zee Signature rings have a plastic ball joint type insert that allows the torch to be moved around until it is pointing where you want and can then be locked into that position
The problem is that you have to buy a pair of rings
This adjustable mount from Ludicrous Lumens works just as well and is a good bit cheaper
www.ludicrous-lumens.co.uk
Cheers
Bruce
The problem is that you have to buy a pair of rings
This adjustable mount from Ludicrous Lumens works just as well and is a good bit cheaper
NEW FULLY adjustable IR mount 25MM & 30MM lamp bodies.
Fully adjustable 25mm OR 30MM IR/Lamp mounting Please select 25mm or 30mm Lamp body above. (30mm mounts are lead time is 7-9 working days) Our new Fully adjustable picatinny/weaver mount is made from super strong SLS nylon 12 material & is very stress & temperature resistant. Allows a large arc...
www.ludicrous-lumens.co.uk
Cheers
Bruce
Because the Blade is so light in weight I bought one of the Ludicrous Lumens mounts to try. It works perfectly. Withstands the knocks and bumps of prolonged use in a Gator. If needed, which is rarely, can be adjusted one handed quickly.The Burris Zee Signature rings have a plastic ball joint type insert that allows the torch to be moved around until it is pointing where you want and can then be locked into that position
The problem is that you have to buy a pair of rings
This adjustable mount from Ludicrous Lumens works just as well and is a good bit cheaper
NEW FULLY adjustable IR mount 25MM & 30MM lamp bodies.
Fully adjustable 25mm OR 30MM IR/Lamp mounting Please select 25mm or 30mm Lamp body above. (30mm mounts are lead time is 7-9 working days) Our new Fully adjustable picatinny/weaver mount is made from super strong SLS nylon 12 material & is very stress & temperature resistant. Allows a large arc...
Cheers
Bruce
Similar threads
