None eject

[Popa ray]

If you e cleaned the extractor claw and it still does the non eject - chances are the claw has over time rounded off

Or your cases have been reloaded many times and done the same ,,,

Extractor is part of a specific extractor kit for 595/695 that is supplied by GMK importer for tikka

It is a self fit if you are competant diy

You will need a vice with soft jaw to hold the bolt and appropriate sized punch for the rill
In

Do not punch the pin out or punch it the wrong way

You also need to remove firing pin first

Thanks for all the replies.
I stripped the bolt,it was spotless except for a little fouling up by the extractor.
I couldn't remove the extractor but cleaned it thoroughly and worked the pin that ejects the case, spring works fine and strong.

I've tried it and seems to be working.
I'll try it in anger (poor Charlie) and post the outcome.
Thanks again
Ray