For Sale: Optilock rings and bases and Warne rings

[andyk]

Having a bit of a clear out, and have the following:

1. Optilock 30mm blued rings and bases (for Sako). A few spots of rust and may benefit from some new screws in the future (reflected in price) - £45.

2. Optilock 25mm blued rings and bases (for Sako) - £45

3. Optilock 25mm stainless rings - £45

4. Warne 25mm rings for picatinny/weaver rail - £35.

All prices include postage.

 

[Crowsfeet]

Do you know the height of the 30mm rings please.
Will they fit a Sako 75.

 

[andyk]

@Crowsfeet yes, they’ll fit a 75. I’ll have a measure on height and report back.

 

[Crowsfeet]

@Crowsfeet yes, they’ll fit a 75. I’ll have a measure on height and report back.

Cheers. Let me know how bad/good/usable the screws are and if they have inserts with them to please.

 

[andyk]

So, they’ve got inserts and are either low or medium (out of extra low, low, medium and high).

The difficulty I’m having is that the measurement Sako gives isn’t clear as to how it’s been taken.

The base of the base to the top of the lower half of the ring is 35.5mm. As a best guess, I’d say they’re low as medium should be slightly higher and I have a feeling Sako might measure from the top of the dovetailed section.

It’s two of the eight small screws that are a bit knackered, all others are fine.