Pez Mod Bush

[activeviii]

I have a costom Pez .222 mod that has no inder sleeve it uses the barrle as the sleeve, dirty but does a fantastic job on the tikka.

I have a 6.5x55 Tikka and a new MAE mod, this one has the inner sleeve and welded closed, none strippable now.

I have the durlin bush and it need machining to fit. I have the lathe and tools so not a major issue but!

I dont want to mess the thread or the knurl portion of the bush while holding in the chuck on the lathe. i dont really want to stat making a jig to hold the threaded area. I dont want to do it with a file either.lol.

has anyone done their own bush, if so give me a clue please.

also is it worth cutting a key for an o'ring like you have on the older Pez.


thanks

Phil

 

[Brian243]

You could give Julian Savoury a call: 01444 400126. JMS Arms are the importers of MAE/PES moderators and Julian will advise.

 

[BunnyDoom]

Yep call Julian - though I know MAE (formerly PES) do have a habit of changing the design so the old one's may not fit the new one's! He charges £10 to supply and fit a standard bush, no idea what the cost will be if it's standard though!

 

[Hornet 6]

Julian has a holder for the larger pes bushes, for the smaller one he just put a demo mod in the lathe and used it as a holder.
Worked fine, well at least my rear bush is cut nice and true.

Neil.

 

[bewsher500]

can you not just use the moderator itself to hold the bush?
will the MOD not fit in the lathe?

 

[activeviii]

the mod did come from julian.lol. i will ring him.

my lathe is a boxfore AUD. 20mm though hole. the mod is 34mm x 335mm


Phil.