I have been working on a few ULs for a while now but didn't want to start this thread until the workshop decks were a little clearer, a man can only answer so many messages.
All the blanks now heat treated (Rc60/61) and grinding has started, the project well under way.
Sheaths are well on their way too which is a huge bonus of these, the sheaths can be pre ordered.
I have blanks of all current models, 90, 110BT, 120, 140F and 150 (more on that below).
First a word on the next model to be introduced, the 90G, a Grallocher model.
The 90G will happen, not yet though, there is a lot of design and prep work that goes into getting a UL off the ground initially, work that is basically out of my hands, that work is under way right now but a conservative guesstimate says that the first actual knives might be a couple of months away.
Alongside the knife what is also in development is it's sheath, the plan here is for it to work as stand alone thing (obviously) but also it 'should' have the ability to be fixed (by means of Kydex screws) to any of the other sheaths, in order to create a double set.
When the 90G is launched it's sheath will fix to any one of these current.
In the stonewashed finish, with a Kydex sheath complete with IWB clip (sheath example shown below), that all in asking price is £135 across the board which I think is tremendous value for money for an outfit of this calibre delivered.
Cerakote is still an option at an additional £40 per knife.
Deliveries will start in the next couple of weeks.
I will keep the numbers below updated.
90 - I have12 0 available
110BT - you have not seen any of these yet but I'll show some photos as and when, I am starting with6 3 available but I expect them to be popular
120 - I have12 0 available
140F & P150 - these will be made to order, about a 4 week lead time, just drop me a line with what you would like and I will slip them into production
90G - not currently taking orders
I'll not go mad with photos, there are lots around the forum and on my socials.
Top to bottom here is the 90, 120, 110BT, 140F and 150.
A few more.
All the blanks now heat treated (Rc60/61) and grinding has started, the project well under way.
Sheaths are well on their way too which is a huge bonus of these, the sheaths can be pre ordered.
I have blanks of all current models, 90, 110BT, 120, 140F and 150 (more on that below).
First a word on the next model to be introduced, the 90G, a Grallocher model.
The 90G will happen, not yet though, there is a lot of design and prep work that goes into getting a UL off the ground initially, work that is basically out of my hands, that work is under way right now but a conservative guesstimate says that the first actual knives might be a couple of months away.
Alongside the knife what is also in development is it's sheath, the plan here is for it to work as stand alone thing (obviously) but also it 'should' have the ability to be fixed (by means of Kydex screws) to any of the other sheaths, in order to create a double set.
When the 90G is launched it's sheath will fix to any one of these current.
In the stonewashed finish, with a Kydex sheath complete with IWB clip (sheath example shown below), that all in asking price is £135 across the board which I think is tremendous value for money for an outfit of this calibre delivered.
Cerakote is still an option at an additional £40 per knife.
Deliveries will start in the next couple of weeks.
I will keep the numbers below updated.
90 - I have
110BT - you have not seen any of these yet but I'll show some photos as and when, I am starting with
120 - I have
140F & P150 - these will be made to order, about a 4 week lead time, just drop me a line with what you would like and I will slip them into production
90G - not currently taking orders
I'll not go mad with photos, there are lots around the forum and on my socials.
Top to bottom here is the 90, 120, 110BT, 140F and 150.
A few more.
Last edited:
could you put me down for a 120 please?
(sorry Tim, is it still too soon? 
