quick release return to zero mount for a senopex thermal?

[Tim1989]

I want to be able to take my senopex thermal off one of my rifles and swap between a day scope , is there any mount to do this with ? needs to be true return to zero

possibly a whole detachable Piccatinny rail to leave the senopex mounted to

 

[fizzbangwhallop]

My A7 is put on and taken off the rifle every time it’s used and is always spot on…. I just use a 6mm hex in a thumb wrench (as sold in Wilkos) now on that other multi-product outlet…

https://www.amazon.co.uk/B20703-Thumb-Wrench-Set-Multi-Colour/dp/B00AF0KLNG

Mind you, the 6mm bit in my Teng torque driver set fits the nuts but I’ve found others to be a nadge too large meaning they’ve needed a bit taking off with a diamond sharpener.

Cheers

Fizz

 

[Tim1989]

My A7 is put on and taken off the rifle every time it’s used and is always spot on…. I just use a 6mm hex in a thumb wrench (as sold in Wilkos) now on that other multi-product outlet…

https://www.amazon.co.uk/B20703-Thumb-Wrench-Set-Multi-Colour/dp/B00AF0KLNG

Mind you, the 6mm bit in my Teng torque driver set fits the nuts but I’ve found others to be a nadge too large meaning they’ve needed a bit taking off with a diamond sharpener.

Cheers

Fizz

cheers mate I will give it a go with a tourqe driver

 

[camo304]

As above swapped my S10 about and it's always bang on.

 

[fizzbangwhallop]

cheers mate I will give it a go with a tourqe driver

I don’t bother with the torque driver…. I’ve been using the thumb wrench for years on various scopes including a Drone Pro, 75/3, Pard008, the Senopex and more lately, a Zulus.

The torque between thumb and forefinger has always been enough.

Cheers

Fizz